Owner manual

VT Series 2 User Manual Page 17
Videoswitch VT601c.doc
8.1 Number of Cameras
Three switch sections are used to specify the number of cameras in the system. If there are less than eight
cameras, connect them to consecutive camera inputs, starting with input 1.
Number of
Cameras
S1-1 S1-2 S1-3
*Programm
able
OFF OFF OFF
2 ON OFF OFF
3 OFF ON OFF
4 ON ON OFF
5 OFF OFF ON
6 ON OFF ON
7 OFF ON ON
8 ON ON ON
*The Programmable option allows individual selection of which cameras are to be sequenced on the
Monitor A output and which cameras are to be sequenced on the Monitor B output by means of SET
operations (section 6.1 and 6.2).
8.2 Random Sequencing
The transmitters are provided with a random sequence mode which can be used on both Monitor A and
Monitor B. This mode is useful when a monitor is on public display for deterrence purposes. The pseudo
random sequence is designed to ensure that all cameras will be selected with equal frequency but in a
unpredictable order.
Set this switch on if you want cameras sequence randomly, and set it off if you want camera to sequence in
normal order (1,2,3 etc):
S1-5 Sequence Mode
OFF Normal
ON Random
8.3 Alarm Modes
Set this switch off if you do not want alarms latched and if you do not require audible indication of the
alarms. Set this switch on if you require alarms to be remembered until manually acknowledged by an
operator, and if you want an audible warning of alarms.
S1-6 Alarm Mode
OFF Unlatched
ON Latched