User manual

Vi-R2000 Series
Videoswitch Page 20 Mdr601a.doc
1.8. Playback and Video Export
Video clips may be backed up to USB sticks. The Vi-R2005 also has a DVD drive that may also be
used to backup.
The simplest and quickest method of backing up video data is as follows:
1. Press The PLAY key to enter playback mode
2. Using the mouse or mouse emulator, select which cameras you wish to view and backup
(click on the triangle on the bottom right of the screen to bring up list of cameras and
calendar)
3. Double click on the calendar to select a day (highlighted if recording is available)
4. Click on the slider bar to select different times of day
5. Use playback buttons to control play/pause and speed (on a Vi-R2005 you can also use
playback keys to control play/pause and speed)
6. Select the start of the video that you wish to export. Press EDIT (hold for 1 second if Vi-
R2001). Alternatively, click on clip button near bottom left of screen.
7. Move slider to end of video section to be exported. Press EDIT again (hold for 1 second if
Vi-R2001). Alternatively, click on clip button near bottom left of screen.
8. Repeat 6 and 7 if there are other clips you require.
9. Press ESC and then click on YES.
10. Put in CD, DVD or USB memory stick and refresh.
11. When ready, press START to export. Wait until completed.
Note: keep clips as small as possible and only include cameras that are required so that exported
data fits onto the backup media.
Intelligent Security and Fire Ltd