User manual

Vi-R2000 Series
Videoswitch Page 14 Mdr601a.doc
1.5. Password Access
If password protection is enabled, a password will need to be selected to gain access to protected
functions such as the menu. When the password box appears, enter the password using one of these
methods:
Keyboard Mode
If you want to select a different User Name press arrow keys to highlight User Name field, press
OK, press down arrow, press OK again.
Press arrow keys to select Password field
Press EDIT key to enter edit mode
Enter password
Press OK
Press arrow keys to select OK on screen
Press OK
Mouse
• Click on user name if you wish to change it and select another use
• Click on password field, enter password numbers and click on ENTER.
• Click on OK
Mouse Emulator Mode
• Click on user name if you wish to change it and select another use
• Click on password field, enter password numbers and click on ENTER.
• Click on OK
3.1.1 Default Passwords
The Vi-R4000 series DVR is shipped with default users and passwords setup as shown in this table.
Access rights may be changed and other users may be added when logged in as admin. All default
settings may be restored by importing the default configuration from a USB memory stick.
Username Default Password Access Rights
admin 12345 Access to everything for system setup
user1 111111 Local, Remote & Camera config all options
user2 222222
Local: search, Camera control & playback and
export. Remote log search
user3 333333 Local manual operation of cameras
user4 444444 Local manual operation of cameras
Intelligent Security and Fire Ltd