User manual

Vi-R2000 Series
Videoswitch Page 11 Mdr601a.doc
1.4. Connecting Up
Vi-R2001 Rear Panel
Vi-R2005 Rear Panel
Essential Connections
• Connect Cameras to camera inputs 1-8
• Connect VGA monitor to VGA port and/or connect BNC monitor to MONITOR (CVBS) port. The
two monitors can display different full screen and multi-screens. Note
that the VGA monitor must be connected prior to switching on the
DVR as it is auto-detected on boot-up.
• Vi-R2005: Connect mains supply to IEC mains input connector on using IEC cable (included).
• Vi-R2001: Connect 12VDC Power adaptor (included) to 12V POWER port.
Optional Connections
• Connect mouse to MOUSE port if keypad mouse emulator is not required or to BACKUP port if
control is required by both the mouse and the keypad mouse emulator
• Connect Ethernet network to ETHERNET port using CAT5 cable (included)
Intelligent Security and Fire Ltd