User manual
ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 97
12 Alarm Profiles
12.1 About Alarm Profiles
An alarm profile defines how the server responds when an alarm or event is triggered. It defines the
transmission channel(s), if the alarm is transmitted when the system is armed/disarmed, whether or not the
alarm is repeated, etc. The server comes with 10 standard alarm profiles. It is not recommended to change
the default profiles. It is better to create new profiles instead.
12.2 Adding a New Profile
You can create up to 32 different alarm profiles.
To add a new alarm profile, proceed as follows:
1. Choose System > Behaviour > Alarm Profiles.
2. Click Add.
3. Provide the following settings:
Parameter
Description
Profile name
Enter a description (max 20 characters) for the alarm profile. It is
recommended to use a meaningful and relevant description.
Active sensor (I201)
If ticked, input I201 – if active – will be triggered. Input I201 can be
used to inform the user that some sensors are still active. This
prevents arming the system while sensors are still in alarm. (see note
underneath)
Profile type
Assign a profile type to the new alarm profile:
0 – Alarm: this is a generic type; you can change any setting. Use it
to customise the alarm profile to your every need.
1 – Fire primary: you can change all settings for this profile type,
except the operational state (fixed to Armed/disarmed) and the
repeat alarm (Repeat tx alarm fixed selected). Use this profile type
if you need a custom alarm profile for primary fire alarms.
2 – Fire advisory: you can change all settings for this profile type,
except the operational state (fixed to Armed/disarmed) and the
repeat alarm (Repeat tx alarm fixed selected). Use this profile type
if you need a custom alarm profile for advisory fire alarms.
3 – Fire verification: you can change all settings for this profile type,
except the operational state (fixed to Armed/disarmed) and the
repeat alarm (Repeat tx alarm fixed selected). Use this profile type
if you need a custom alarm profile for fire verification alarms.
4 – Fire trouble: you can change all settings for this profile type,
except the operational state (fixed to Armed/disarmed) and the
repeat alarm (Repeat tx alarm fixed selected). Use this profile type
if you need a custom alarm profile for fire trouble alarms.