User manual

User Manual ADPRO
®
XOa Client Software
80 21796_05_preliminary
2. In the Monitor box, select the desired resolution.
3. In the Matrix pane, click the desired matrix layout.
4. Add camera images to the matrix as follows: click Select, and click the desired camera in the popup
list. Next, click the matrix cell where you want the camera image to appear.
Note
You can assign a camera image to only one matrix cell.
5. To replace the existing camera image in a matrix cell, click Select, select a different camera, and then
click the matrix cell.
6. To add the camera name on the matrix cell, click OSD, and then click each matrix cell where you want
the camera name to appear. The camera name appears in the top left corner of the matrix cell.
Click again to remove the camera name.
7. To remove camera images from the matrix, proceed as follows:
- To remove one camera image, right-click the matrix cell.
- To remove all camera images, click Clear.
8. Click Save.
8.2.3 Disabling the Matrix View
To disable the monitor matrix view, proceed as follows:
1. Choose System > Connections > Monitor.
2. In the Monitor box, select Disabled.
3. Click Save.
8.2.4 Switching Between Matrix View and Welcome Screen
You can easily switch between the matrix view and the welcome screen if you have a keyboard attached to
the server:
 To switch to the welcome screen, press Ctrl+Alt+F1.
 To switch to the matrix view, press Ctrl+Alt+F7.