User manual

User Manual ADPRO
®
XOa Client Software
78 21796_05_preliminary
8.1.4 PTZ Control
In the PTZ section you can control the PTZ cameras.
Use the arrows to move the camera to the left or right and up or down. Use the “Home
button” in the middle to move the camera to the selected preset position (= start
position).
When this button is lit (orange arrows), you can use digital zoom. Simply select a
camera and you will see that the mouse indicator changes. Click the left mouse button
and hold it to zoom in. To zoom out press the Shift key and the left mouse button.
When zoomed in, the text Digital Zoom appears (in green letters) on the image.
This slider adjusts the moving speed of the PTZ camera when using the player’s built-
in controls.
With this function you can zoom in or zoom out on a selected image.
Click the middle button to manually adjust the focussing. Use the + and – buttons to
adjust.
Click to manually adjust the iris. Use the + and – buttons to adjust.
Click to wash and/or wipe the lens of the outdoor camera. The camera has to have this
feature of course.
Store the camera position.
Open the drop-down list to select one of the 4 possible camera preset positions. Click
the floppy disk button to store the actual camera position in the selected preset
number. Click the waste bin button to remove the preset position from the list.
Enable or disable the selected auxiliary function on the camera. Auxiliary camera
functions vary depending on the camera model. Please read the ADPRO Tech Tips for
more information about auxiliary camera functions.
PTZ shortcut keys on the keyboard:
 Arrow keys (up, down, left, right)
 Home = Zoom in
 Page Up = Zoom out;
 End = Focus near;
 Page down = Focus far;
 Shift = Shift key enabled (only applies to new PTZ control).
Also on screen PTZ is available. Move your cursor to the edge of the image and it will transform in a white
arrow. Keep the left mouse button pressed to go to a new position.