User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 69
Tick Event for What to record.
Click OK and Save to apply the new settings.
Note
You could also tick the Continuous mode for “What to record” to create a mixed recording. Such
recording will record continuously at the chosen quality and will switch to another quality on the
selected event(s).
In the section Events click Add.
The following window appears:
Select the desired alarm trigger and click OK.
Several conditions can be added. For each condition you should define whether the condition should also be
fulfilled (AND) or whether this condition alone should trigger the alarm (OR). You cannot combine AND an
OR conditions.
If you invert the alarm, the recording will start when the end-of-alarm is received.
In the section Recording length you can define the duration of the recording. It is possible to set a time (value
in seconds) for recording before, during, and after the event. For recording during the event you have the
choice between Event duration or a predefined period.
When the triggers follow each other so quickly that the recordings overlap, the multiple recordings will be
melted into 1 recording.
Click OK and Save to apply the new settings.