User manual

User Manual ADPRO
®
XOa Client Software
68 21796_05_preliminary
Up to 8 time zones can be defined.
Select Mode based to activate the recording in function of the operational mode of the video system. The
operational mode (1 to 4) is programmed automatically (with mode schedule) or manually (with switch).
For more information on switching modes, see Recording Mode Schedule on page 63.
Tick Continuous for What to record.
Click OK and Save to apply the new settings.
Note
Continuous recording is not allowed with a Transmission-only system license.
7.3 Recording on Event
Select “Time based” to activate the recording in function of a time schedule. Click and hold the left mouse
button and drag the mouse over the Event time scale to mark the time zone during which the recording
should be active. To correct for errors, right-click the time scale to clear the time zone and retry. To prevent
any conflicts, it is recommended to clear the Continuous time scale.
Up to 8 time zones can be defined.
On recording on event it is also possible to “lock” the recording. This means that the recording cannot be
erased automatically. Furthermore, locked recordings trigger the system message 0049 – [SYST] – LOCKED
RECORDER (by default linked to the alarm profile NORMAL EVENT).
Caution!
XOa cannot delete locked recordings. When it encounters a locked recording during automatic
clean-up (for example after 30 days), RMG stops cleaning up and also stops recording. For
more information on handling locked recordings, see Locked Recordings on page 90.
Select “Mode based” to activate the recording in function of the operational mode of the video system. The
operational mode (1–4) is programmed automatically (with mode schedule) or manually (with switch).
See also Operational Mode with Time Schedule on page 63.