User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 67
7.1.1 Name
By default the name Recording condition 0 (or any next number depending on the number of recording
conditions that have been defined) is provided. It is recommended to change the name into a meaningful and
relevant description. A maximum of 20 characters can be used.
7.1.2 Cameras
Tick the desired camera. You can tick multiple cameras if necessary.
Click the camera number to:
 activate an output when recording (you need to set up a recording-controlled output first, see
Input/Output Behaviour on page 107);
 go to a preset position (PTZ) when the recording is started;
 go to a preset position (PTZ) when the recording is ended.
Click OK to save and apply any modifications you might have made and return to the previous window.
Next, tick the days on which the specific recording should be made. The recording is by default active during
the full year. If you want this recording to apply only for limited periods, delete the listed period and add a
customized period.
Select the Ho check box to enable recording on holidays (see Calendar on page 133).
You can add multiple periods in which the recording should be active.
Next, you can specify when exactly the recording has to take place.
7.2 Continuous Recording
Select Time based to activate the recording in function of a time schedule. Click and hold the left mouse
button and drag the mouse over the Continuous time scale to mark the time zone during which the
recording should be active. To correct for errors, right-click the time scale to clear the time zone and retry.