User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 65
To set up manual switching between two operational modes, proceed as follows:
1. Choose System > Behaviour > Recording Mode Schedule.
2. Select the Use switch check box.
3. In the Switch inactive box, select the operational mode that you want to use when the switch is
inactive.
4. In the Switch active box, select the operational mode that you want to use when the switch is active.
5. In the Mode name boxes for the two selected modes, type a meaningful name for the modes. You can
use up to 20 characters. An example:
- Mode 1 = DAY
- Mode 2 = NIGHT
6. Click Save.
The system now switches from one mode to another according to the input.