User manual

User Manual ADPRO
®
XOa Client Software
64 21796_05_preliminary
- Mode 4 = EMERGENCY
The Schedule pane shows a time bar for each day, and one for holidays. By default, the system
operates in mode 1 during the whole schedule: all time bars are red.
4. Under Tools, click the desired mode button (Mode 1–Mode 4) and then drag the mouse over the day
and time when the mode has to be active. Where you drag, the time bar changes to the colour of the
selected mode.
5. If you have a repeating schedule, you can copy the schedule from Monday to all other days (including
holidays): click Copy Monday, and then click Yes to confirm.
6. Adjust until you have the correct schedule for each day.
7. Click Save.
The system now switches automatically from one mode to another according to the schedule.
6.3 Operational Mode with Manual Selection
If you use manual selection, you can switch between two operating modes. You define the modes, and the
input that serves as a switch.
To define an input as operational mode switch, see Input/Output Behaviour on page 107.
Note
If you use manual selection (switch), you can use only two operational modes. If you need more
modes, then you have to use the time schedule instead of the switch.