User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 63
6 Recording Mode Schedule
6.1 Operational Modes
The video system can operate in up to 4 different modes. In each mode, the video recorder can behave
differently. For example, you can record continuously in one mode, and record only on events in another
mode. There are several ways to switch from one operational mode to another:
 Automatically, according to a time schedule. See Operational Mode with Time Schedule on page 63.
 Manually, using an input as a switch. See Operational Mode with Manual Selection on page 64.
 It is also possible to change the operational mode using third-party software. For more information, see
the documentation of the ADPRO XOa Software Development Kit (SDK).
The sections below describe how to set up automatic or manual switching.
To define the input that you want use as a switch, see Input/Output Behaviour on page 107.
To define how the video recorder behaves in each mode, see Recordings Behaviour on page 66.
6.2 Operational Mode with Time Schedule
With a time schedule, you can automatically switch between up to 4 operational modes. You define which
mode is active when. Only one mode can be active simultaneously.
To set up automatic switching between operational modes, proceed as follows:
1. Choose System > Behaviour > Recording Mode Schedule.
2. Make sure that the Use switch check box is cleared.
3. In the Mode name 1 to Mode name 4 boxes, type a meaningful name for each of the operational
modes. You can use up to 20 characters. An example:
- Mode 1 = DAY
- Mode 2 = NIGHT
- Mode 3 = HOLIDAY