User manual

User Manual ADPRO
®
XOa Client Software
62 21796_05_preliminary
3. Click Edit.
4. Choose the correct option: Pan-Tilt-Zoom.
5. Select the desired protocol, depending on the camera type. Enter baud rate, stop bits, data bits, parity,
and flow control according to the camera specifications. Normally the settings are correct when
choosing the protocol. Clear the Hide unknown protocol settings check box if you want to modify
the default settings.
6. Click Apply and Save to maintain any modifications.
Note
The external USB ports, used for PTZ control, can be found at the rear of the server. A
converter to convert USB to RS-232 or RS-485 is required.
Note
Telemetry station manufacturers provide a variety of models and features. The server provides
PTZ control ability for a number of popular models and where possible, supports the features
provided by the manufacturer. Due to the number of models available on the commercial
market, details of connection and use for individual models have not been provided in this
manual. Xtralis does, however, have tech tips available for these cameras on the Xtralis
Support website www.xtralissecurity.com.
5.5 PTZ Control via DTC Card
Open the PTZ window via System > Connections > Serial Ports / PTZ. Check if the DTC card is present.
Note
The current software version loaded in the DTC card is shown in the list. To update the DTC
card to a more recent software version, open System > Connections > Serial Ports / PTZ.
Click Update and locate the file dtc.img with the latest software. Click Apply.
These PTZ protocols are supported on the DTC card:
 Down-the-Coax (Pelco Ext.)
 Down-the-Coax (Baxall Std.)
 Down-the-Coax (Baxall Alt.)
 Down-the-Coax (BBV coax)