User manual

ADPRO

XOa Client Software User Manual

21796_05_preliminary 61

 Conway

 CS Lilin

 CS Lilin 2

 Dennard 2050

 Diamond

 Digital Sprite

 Elbex

 Ernitec

 GPS

 Grundig

 Harris

 JVC

 Kalatel

 Mark Mercer

 Molynx

 Molynx Variable Speed

 Sensormatic Controller

 Sensormatic Speeddome VII

 Siemens

 Synectics

 TEB

 TEB (rail)

 Unidex

 VCL

 Vicon

 Video Switch

 Visca

 Vista Powerdome

Note

 When using the Pelco Spectra Cam 4, the PTZ address has an offset of -1 in the XOa client.

 When using the JVC protocol, the PTZ address has an offset of +1 in the XOa client.

Example:

When using a JVC protocol with address 1 in the XOa client, the PTZ address of the camera

is 2.

5.4 PTZ Control via USB Port/MIO Card

To set up the connection for PTZ control via USB port or MIO card, proceed as follows:

1. Choose System > Connections > Serial Ports / PTZ.

2. Select the correct port in the list:

- For a connection via the first MIO card, select /dev/ttyU6.

- For a connection via the second MIO card, select /dev/ttyU8.

- For a connection via USB, consult the FastTrace 2 Hardware Installation Manual for the correct

port number.