User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 57
5 Using Analogue Cameras
5.1 Video and Audio Connections
Analogue cameras can be connected to the rear of the RMG video system using a BNC connecting RG59 or
RG11 cable.
Each camera needs a separate BNC input! Depending on the configuration of your server, you will have 4, 8,
12, 16, or 20 analogue BNC camera inputs.
5.2 Analogue Camera Setup
To add an analogue camera, you need to connect the camera to the video system and open System >
Connections > Video inputs. Then choose a free camera number from the list:
Up to 20 cameras can be connected to the RMG video system. For every analogue camera 1 A/V input is
required.
Tick the Analog option:
Select the BNC input and click Enable.
When enabled you can adjust some parameters.