User manual

User Manual ADPRO
®
XOa Client Software
56 21796_05_preliminary
Set the recording parameters by clicking the desired quality.
 Fps: the number of frames per second (1–25);
 Resolution: the number of pixels per image; depends on the camera type;
 VBR: selects a variable bitrate compression (Qlow, Qnormal or Qhigh);
 CBR: selects a constant bitrate compression (value 20–2048 kbps*); the higher the value, the lower the
compression, the higher the quality and the higher the consumed bandwidth. The video quality level is
constantly adapted to fulfil the required bitrate setting. VBR with Qnormal quality is recommended!
* This range is for analogue inputs and may differ for IP cameras.
Click Save.
Note
Before using the IP camera, you need to set up a static IP address in the camera, create a
password for the user “root”, and set the date and time. You can adjust the time and date
manually or you can synchronize the camera in the RMG to an NTP protocol.
Check the manual provided with the camera for more information on setting up the IP address,
password, and clock.