Manualshelf

User manual

ManualsBrandsVideoswitch ManualsComputer equipmenti605
51525354555657585960
User Manual ADPRO
®
XOa Client Software
54 21796_05_preliminary
PIR integrated on
camera
Check this option when a PIR has been integrated on this camera. The option is
only available if the IP camera has an integrated PIR (e.g. Axis M1054).
Activating this integrated PIR will enable you to send/receive PIR alarms for this
specific camera.
4.3.2 Video Settings
You need to click Adjust video settings to be able to make any modifications. From the moment you
activate this, you will obtain the live image from the IP camera.
4.3.3 Brightness/Contrast/Saturation
If the image does not provide enough quality, you can adjust brightness, contrast, and hue in the Brightness /
Contrast / Saturation section.
4.3.4 Overlay
Local time
Tick this option if you want to display the local time on the camera’s live image.
Camera name
Tick this option if you want to display the camera name on the camera’s live image.
Site name
Tick this option if you want to display the site name on the camera’s live image.
Text brightness
This option is not available for IP cameras. The parameter can be added to the IP
camera settings via the camera’s web browser.
4.3.5 Network
Default live preset
When watching live images from a camera, the image quality can be adjusted at
any time by clicking your right mouse button. The initial quality, applied the first time
you select the camera, can be specified with this parameter.
You can choose from different preset qualities, depending on the camera. If you
choose “Hard disk stream”, live pictures will follow the same quality as continuous
recordings. This way, only two streams are required.
With certain types of IP cameras this button becomes active. Via this button you
can open the list with possible quality presets.
The parameters you can modify here, are:
Frames per second (fps)
Resolution of the picture
Quality: VBR quality (Qlow, Qnormal or Qhigh) or CBR bit rate (20 through
2048 kbps). The higher the value, the better the quality, but also the higher the
bandwidth use!
Remark: for stable image quality, VBR is recommended.