User manual

User Manual ADPRO
®
XOa Client Software
52 21796_05_preliminary
The Remaining Cams box displays the number of remaining IP camera channels.
Select the camera brand and type the correct IP address, the username and corresponding password of the
camera (e.g. “root” for Axis cameras). Check the camera documentation for the correct password.
If you tick the option Treat this cam as a single stream cam, only one stream will be used for all features
related to the server. This means, however, that there will be specific limitations in the RMG video system:
the only stream that the RMG video system will use is the analytics stream. As a result this will be a CIF
resolution at 5 fps (or the minimal quality available on the camera). Typically, the analytics stream from a
camera is stream 1. However, if the camera uses a different stream for analytics, you can specify the stream
number in the Use stream nbr box.
If you tick the option Thermal the camera will be enabled as thermal camera.
Click Enable to start using the IP camera.