User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 51
4 Using IP Cameras
Please check the Supported IP Cameras list before connecting IP cameras to the server. You can download
the list from the Xtralis Support website www.xtralissecurity.com.
4.1 RMG Units with HIPI Card (FastTrace 2 Series Only)
When your FastTrace 2 RMG unit is equipped with one or two HIPI cards, you do not need to take any action
to activate the IP camera channels. One HIPI card automatically provides 8 IP camera channels. The
camera setup screen displays the number of remaining IP camera channels (see IP Camera Setup on
page 51).
4.2 RMG Units with IP Gateway Card (FastTrace 2 Series
Only)
The FastTrace 2E RMG units are equipped with an IP gateway card. When using the IP gateway card, you
have to activate IP channel licenses. These licenses are provided as application licenses in sets of 4
(providing either 4, 8, 12, 16, or 20 IP channels). You deploy them on your FastTrace 2E unit via the Xtralis
Xchange Tool. You can always purchase extra sets of IP application licenses to add to your FastTrace 2E
unit.
The camera setup screen displays the number of remaining IP camera channels (see IP Camera Setup on
page 51).
Note
It is not allowed to use both HIPI cards and IP gateway cards in one FastTrace 2 unit. When the
FastTrace 2 unit detects a HIPI card, it will automatically use the HIPI card and ignore any IP
licenses!
4.3 IP Camera Setup
Note
You need to configure the HIPI/Ethernet card(s) before configuring the IP cameras. For more
information, see IP Camera Network Configuration on page 32.
To add an IP camera, you need to connect the camera to the network and open System > Connections >
Video inputs. Then choose a free camera number from the list.
Under Type, click IP cam.