User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 49
2. Click Add. The following screen appears:
3. In the Name box, type a meaningful name for the mailing list.
4. If the mailing list is used with iTrace iCommand, select the iTrace check box.
First, you will add the required email addresses.
5. Under Destinations, click Add.
6. In the Email address box that appears, type the email address, and then click OK.
7. Repeat for all other required destination addresses.
8. To remove an email address, click on the address, and then click Remove.
9. To change an email address, click on the address, and then click Edit. Change the email address as
required and then click OK to confirm.
Now you can add the inputs that will trigger the email.
10. Under Triggers, click Add. The list with all possible triggers appears.
Use the filter below the list to reduce the list.
11. To add a trigger, double-click it in the All triggers list. The selected trigger now appears in the
Triggers box:
12. To remove a trigger from the Triggers list, double-click it.