User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 43
3.5.4 Searching Net I/O Modules on the Local Network
Open the I/O window via System > Connections > I/O.
Click Search. Underneath the section Network I/O search results will appear.
Select the desired I/O module and click Add. The selected Net I/O module is now shown in the list Network
I/O.
Add all desired Net I/O modules and then click OK. In the list with Network I/O modules, select the desired
module to edit and/or configure.
3.5.5 Modifying the IP Settings of a Net I/O Module
Open the Net I/O configuration window via System > Connections > I/O. Select the desired Net I/O module
from the list and click Edit.
Enter the IP address and Net I/O address (order number 1–8). Click OK and Save.
3.5.6 Net I/O Module Inputs and Outputs Setup
Open the I/O window via System > Connections > I/O. Select the desired Net I/O module from the list and
click Configuration.
Modify the name of the network I/O module. It is recommended to use a meaningful and relevant description.
Modify the port of the Net I/O module. This port should be the same port as selected when the I/O module
was added.