User manual

User Manual ADPRO
®
XOa Client Software
34 21796_05_preliminary
Note
From version 2.9 onwards, you can configure the HIPI card to function as an Ethernet card,
providing software decoding of the IP camera streams.
In this case you need to update the HIPI card software with HIPI fpga update file
01.00.0004(02.0).hui.
To update the HIPI card to a more recent version of the software, proceed as follows:
1. Choose System > Maintenance > Hipi/Eth config.
2. Click the button and browse to the .hui upgrade file.
3. Click Open. The Version box displays the firmware version that you will upload.
4. Click Transfer.
5. Click Yes to confirm.
6. In the Transfer upgrade file panel, click Update.
7. Click Yes and wait for the system to reboot.