Manualshelf

User manual

ManualsBrandsVideoswitch ManualsComputer equipmenti605
21222324252627282930
User Manual ADPRO
®
XOa Client Software
30 21796_05_preliminary
Click Advanced. The following screen appears:
Parameter
Description
Default value
Data rate (bps)
This sets the baud rate of the modem.
115200
Initialisation string
Hayes command string to initialize the modem.
–
Dial out timeout (sec)
This sets the time in which a connection has to be
established with the remote client. If not successful, the video
system will retry to make the connection. The number of
attempts is limited by the parameter “Connection retries”. Be
aware that a PPP connection over PSTN can easily take
30 to 60 seconds.
35
Answer rings
(0 = no answer)
This sets the number of rings on an incoming call before
hooking off.
0
(do not answer
any call)
Connection retries
The number of attempts the video system will make to
connect to the remote client.
3
Connection idle timeout
(sec)
This sets the delay after which the video system will
disconnect if no more data is exchanged.
30
Minimal authentication
protocol
Selects the authentication protocol that will be used during
the setup of a remote connection:
PAP/CHAP/MSCHAPv1/MSCHAPv2.
MS CHAPv1
3.1.4.2 3G Modem Configuration
If you have connected a 3G modem to the server, choose the option 3G for modem type in the PPP section.