User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 29
Parameter
Description
Default value
Modem type
Set the modem type to PSTN when using a standard modem
that uses the analogue line (AT modem) or digital line
(ISDN). The modem should always be connected to the first
USB port /dev/ttyU1.
None
PPP username
The login username of a user allowed to connect to the dial-
in network (PPP authentication).
V3100
PPP password
The login password of a user allowed to connect to the dial-in
network (PPP authentication).
666777
Dynamic DNS server
Choose the correct provider from the list.
Note
First the Dynamic DNS account (with any
Dynamic DNS service provider) needs to be set
up.
None
Dynamic DNS user
Enter the username you have received from your provider for
the Dynamic DNS account.
–
Dynamic DNS pass
Enter the password you have received from your provider for
the Dynamic DNS account.
–
Dynamic DNS host
Enter the host you have received from your provider for your
Dynamic DNS account.
–
Max. bandwidth
This limits the bandwidth used by the video system. This may
affect image rate, but not image quality, during live viewing.
The value is expressed in kbps. “0” means no limit.
33
(suitable for
V34 modem)
Currently used
bandwidth
This shows the current bandwidth usage, both the value and
the graphical view.
The value is expressed in kbps.
–
Click Dial in/out to open this window.
Parameter
Description
Default value
IP server address
This is the IP address that will be assigned to the server
when the client establishes a remote connection.
192.168.100.10