User manual

User Manual ADPRO
®
XOa Client Software
24 21796_05_preliminary
To set the date and time, proceed as follows:
1. Choose System > General > Date/Time.
2. To switch automatically between summer and winter time, set Daylight savings to Yes.
3. Click the correct time zone in the list.
4. In the Date box, click the correct date.
5. In the Time box, type the correct time in hours, minutes, and seconds. Enter the time in 24 h notation.
6. If you want to use an NTP server to synchronise time: in the NTP server box, type the NTP server’s
IP address, or its dynamic name.
7. Click Save. The following message appears:
8. Click Yes and wait for the system to reboot.