User manual

User Manual ADPRO
®
XOa Client Software
162 21796_05_preliminary
24.6 Hard Disks
Recordings are stored on the available hard disks in the server. The Harddisks window displays information
about available storage space.
Open System > Maintenance > Harddisks.
24.6.1 Information
The following information is disclosed in the Information section:
Current write speed
The bitrate depends on video contents and may vary continuously. The
average value is indicated in red.
Show target speed to
record
By entering the required number of days in Show target speed to record
and clicking Set you calculate the corresponding write speed. The red line
will then be displaced to the obtained result. Recording behaviour will
have to be modified to obtain the estimated bitrate.
Estimated days, base is
current speed
Estimated hard disk storage capacity based on current measured bitrate.
This value is expressed in number of days.
Estimated days, base is
past recording
Estimated hard disk storage capacity based on existing footage stored on
the hard disk. This value is expressed in number of days.
Free space for recording
This value is expressed in MB.
24.6.2 Mount Points
Because of the RAID 1 possibility the hard disks are not identical to the writing disks used by the RMG
system. In the MountPoints section you get an overview of the writing disks that are in use.
24.6.3 Harddisks
In the Harddisks section you get a list of all hard disks that have been installed in the video system. For
each hard disk you can see the free disk capacity and the total disk capacity. You will also see which disks
have been put in RAID 1.