User manual

User Manual ADPRO
®
XOa Client Software
160 21796_05_preliminary
E
Type of event:
 +: start of the event
 –: end of the event
 R: repeated event
T
What the event triggers (corresponds with the Camera view style as defined for the
input/output):
 L: Live video
 Q: Quad alarm
 D: Duress (live + quad)
 S: System event, does not trigger a camera view
Quad id
Identification number of the quad images that the event generated.
Camera mask
The camera mask indicates the cameras associated with the input/output, as defined
in the input/output behaviour. For camera 1, the first digit counting from the right = 1.
For camera 5, the 5
th
digit counting from the right = 1. If both camera 1 and 5 are
associated with the input, both the first and the 5
th
digit = 1 (always counting from the
right).
ATX
Alarm Transmission status:
 blank = no transmission required
 OK = transmission successful
 NOK = transmission not successful
Alarm Time
Date and time of the alarm
Alarm Dest.
Alarm destination = the IP address of the destination where the alarm is sent to.
Data
Extra information, for example the IP address of the PC that establishes a remote
connection.
From the event log, you can display and save quad images that an event generated. This only works for
transmitted quad images (ATX = OK).
To display quad images from the event log, proceed as follows:
1. In the event log, click the desired event line that has quad images: