User manual

User Manual ADPRO
®
XOa Client Software
156 21796_05_preliminary
24.4 PTZ Overview
The PTZ overview screen displays an overview of PTZ camera configurations, and of the configured PTZ
presets that the RMG can trigger. It includes the presets on and after event recording conditions, on I/O
triggers, and for SmokeTrace. You cannot modify any settings in this screen; it is for information only.
The sample screen above shows the following information:
Item
Description
Protocol overview
Camera
The PTZ camera name.
Protocol
The port and PTZ protocol.
Address
The camera address for PTZ control.
Auto Home
The time (in seconds) after which the camera moves back to its home position.
Positioning time
The delay (in seconds) for the corresponding alarm message.
Preset position overview
Camera
The PTZ camera name.
Condition
The trigger that instructs the camera to move to a preset position. The example
screen shows:
 The number and name of an input (I2576) that triggers camera ‘PTZ Hall’ to move
to preset position 2.
 A SmokeTrace trigger for camera ‘PTZ Hall’ to move to preset positions 0, 2, 3,
and 4.
 Event triggers: ‘event S3100’ triggers camera ‘Cam 1 ptz’ to move to preset
position 2 on the event, and back to preset position 1 after the event.
Preset position
The number of the position that the camera moves to.