User manual

User Manual ADPRO
®
XOa Client Software
152 21796_05_preliminary
4. Click setup.exe to download the setup file.
5. Click Run, and then follow the instructions of the installation Wizard.
Alternatively, you can download the installation file, and launch it from the download folder.
Note
After a software update, the RMG starts optimising the recording disks. During this optimisation
process, the video system does not record, and the system may display an error message to
indicate this. When the optimisation process is finished, recording restarts automatically. The
time needed for optimising the disks depends on the number of disks, the amount of video data
on the disks, etc.
24.2 Licenses
You can load different types of licenses in the video system:
 System license
For more information, see System License on page 153.
 Encoder license = a license for the analogue video cards in the video system
 Application license = a license for using an extra application. For more information, see Application
Licenses on page 154.
To see which licenses are available on your video system, click About in the top menu.
The different panels display the following information:
 Application license details: a list of all installed application licenses, their expiry date, if they are
revocable, if they are recurrent, ID, if the licenses are in use or not, and the camera to which they are
assigned.
 System: system information such as the system license, identifier (MAC address), encoder card
licenses, analytics channels, motherboard type…
You can click Clipboard to copy the system information. You can then, for example, paste the system
information into an email to Xtralis technical support staff.
 Analytic library details: version numbers of the libraries for analytics.
If you do not have access to the XOa client software, you can use the ta,license command in a Telnet
session to display the license information.