User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 151
24 System Information
24.1 Checking the Firmware and Software Version
At regular times new firmware and software updates are released. You can download these new releases
using the Xchange Tool. For more information, see the Xchange Tool User Manual.
To check the version of your system (server and client), you can use the client software.
Click About in the top menu.
You will get the information about the XOa client version and the server version:
You can also check the firmware versions of the different dll files that are used by the server.
The Uptime section shows how long you have been connected to the server with this client software.
It is always recommended to have both client and server on the same version, but in principle different
versions can be used. When your client software is older than the firmware version on the server, the
following warning message appears when you start the client software:
Click OK to close the message box. The client software opens, but the following warning appears:
Note that the System menu is unavailable until you update the client software.
To update the client software, proceed as follows:
1. Close the XOa client software.
2. Open your web browser.
3. In the address box, type the server’s IP address followed by /setup.php. For example:
http://10.0.0.10/setup.php
The following window appears: