User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 143
20 Configuration Management
20.1 Storing a Configuration
The video system can store up to 8 different configurations. Only 1 configuration can be active. The server
stores any changes you make in the active configuration (if you save the changes). Any unsaved changes
are lost when you close the client software.
To open the Configuration Management window, choose System > Maintenance > Configuration
Management. The list of configurations appears. An asterisk (*) marks the active configuration.
To store the current settings in the active configuration (in the example above: Configuration 1 – Default *),
click Commit server configuration.
Caution!
When you click Commit server configuration, the video system stores the current settings in
the active configuration (= the configuration marked by an asterisk (*). It does not store the
settings in the selected configuration (= the configuration that is highlighted in the list).
If you want to store the current settings in a different configuration, you must first store the
settings in the active configuration, and then copy the active configuration into the other
configuration.
Xtralis recommends using a meaningful and relevant name for the configurations. To change the name of a
configuration, select the configuration in the list and then click Rename. Type the name in the Name box and
click OK.
20.2 Copying Configurations
If you want to use a new configuration, you do not have to set up the configuration from scratch. You can
copy the settings from any existing configuration to the new one. Afterwards, you can make the necessary
changes to the new configuration.
To copy the settings of one configuration to another, proceed as follows:
1. In the list of configurations, click the configuration that you want to copy from.
2. Click Copy.
3. In the list of configurations, click the configuration that you want to copy to.
4. Click Paste. The following message appears:
5. Click Yes to confirm.