User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 139
4. To allow or deny manually activating inputs, click Activate outputs, and then click Allow or Deny.
5. Click Apply.
6. Click Save.
18.4.5 General
Define whether or not the specific user has access to some general functions. Proceed as follows:
1. In the access rights panel, choose General.
2. Click Set tech rights, and then click Allow or Deny to define if the user is allowed to grant access for
the Technician users. For more information, see Granting the Technician on page 140.
3. Click Arm/disarm, and then click Allow or Deny to define if the user can arm or disarm the video
system (change the operational mode). See Operational Mode with Manual Selection on page 64.
4. Click Audio talk, and then click Allow or Deny to define if the user can use the microphone to talk to
people on-site. See Audio on page 77.
5. Click Apply.
6. Click Save.
18.5 Modifying or Deleting an Existing User
Only Administrator users can modify or delete users. Normal users and Technicians can only modify their
own user profile.
Note
You cannot delete users 0 (Administrator) and 15 (Technician).
To modify or delete an existing user, proceed as follows:
1. Choose System > General > Users.
2. To modify a user, click the desired user, and then click Edit.
3. Change the required settings, and then click Apply.
4. Click Save.
5. To delete a user, click the desired user, and then click Remove.
If you try to delete your own user profile, the following warning appears:
Caution!
If you delete your own user profile, you will not be able to log on again. You will lock
yourself out of the system.