User manual

User Manual ADPRO
®
XOa Client Software
138 21796_05_preliminary
18.4.3 System
Define whether or not the specific user has access to the system settings. Proceed as follows:
1. In the access rights panel, choose System > System.
2. Click Deny if you do not want the user to access the System window. In this case, you can skip all
following steps. If you allow the user to access the System window, continue with the setup.
3. Define the system settings to which the user has access. The user rights are grouped according to the
main menu groups in the system settings pages:
 Connections
- Ethernet
- Serial
- Video Inputs
- Monitor
- Audio
- I/O
- PresidiumHLI
- Video interconnection
- E-Mail
- Active connections
 Behaviour
- Arm/Disarm Schedule
- Alarm Profiles
- Input/Output Behaviour
- CMS Alarm Transmission
- Analytics
If you allow access to the Analytics settings, then also define for which cameras
- PIR
- Access control
- Recording
- E-Mail Addressbook
 General
- Date/Time
- Calendar
- Users
 Maintenance
- Log
- Transfer
- Harddisks
- Hipi/Eth config
- Configuration Management
4. Select or clear the desired check boxes.
5. Click Apply.
6. Click Save.
18.4.4 Status
Define whether or not the specific user has access to the Status page. Proceed as follows:
1. In the access rights panel, choose Status > Status.
2. Click Deny if you do not want the user to access the Status window. In this case, you can skip all
following steps. If you allow the user to access the Status window, continue with the setup.
3. To allow or deny isolating alarm inputs, click Isolate, and then click Allow or Deny.