Manualshelf

User manual

ManualsBrandsVideoswitch ManualsComputer equipmenti605
131132133134135136137138139140
ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 137
7. To define for which cameras the user is allowed to save PTZ presets, click Save presets.
8. Clear the check boxes for the cameras for which this user is not allowed to save PTZ presets, and
click Set.
You can click Clear to clear all the check boxes, and then select just the few cameras that are
allowed.
9. Allow or deny access to the following functions:
- Right click menu: right-click to change the resolution or to de-warp 360° camera images in the
live view
- Snapshot: take a snapshot of the video that is available in the live view
- Recordings: record the video images in the live view
- Enable bounding boxes: switch bounding boxes on or off in the live view.
10. Click Apply.
11. Click Save.
18.4.2 Recorded Video
Define whether or not the specific user can watch recordings via Timeline/Postmotion and back up
recordings. Proceed as follows:
1. In the access rights panel, choose Recorded Video > Timeline/Postmotion.
2. Click Deny if you do not want the user to access the Recorded Video window. In this case, you can
skip all following steps. If you allow the user to access the Recorded Video window, continue with the
setup.
3. To define which cameras the user can access, click Cameras. By default all cameras are selected.
4. Clear the check boxes for the cameras that this user is not allowed to view, and click Set.
You can click Clear to clear all the check boxes, and then select just the few cameras that are
allowed.
5. To allow or deny backup, click Backup.
6. Click Apply.
7. Click Save.