User manual

User Manual ADPRO
®
XOa Client Software
136 21796_05_preliminary
Note
If you want to tick all options (rights), you can click Set all.
If you want to clear all options (rights), you can click Clear all. All options will be cleared, but the
user itself will not be deleted!
18.4.1 Live Video
Define whether or not the specific user can access the Live Video window in the XOa client. Proceed as
follows:
1. In the access rights panel, choose Live Video > Live Video.
2. Click Deny if you do not want the user to access the Live Video window. In this case, you can skip all
following steps. If you allow the user to access the Live Video window, continue with the setup.
3. To define which cameras the user can view, click Cameras. By default all cameras are selected.
4. Clear the check boxes for the cameras that this user is not allowed to view, and click Set.
You can click Clear to clear all the check boxes, and then select just the few cameras that are
allowed.
5. To define for which cameras the user can control PTZ, click PTZ control.
6. Clear the check boxes for the cameras for which this user is not allowed to use PTZ control, and click
Set.
You can click Clear to clear all the check boxes, and then select just the few cameras that are
allowed.