User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 131
2. Select the PIR that you want to configure, and then click Edit. The list of available triggers appears.
3. If necessary, filter the list (for example on camera inputs), and then click the desired trigger. In the
example below, the IntrusionTrace alarm on camera 01 is selected.
4. Click Apply. The selected trigger appears in the Double knock configuration list.
5. Click Save to save the PIR settings.
Now you can set up the desired alarm profile for the double-knock input.
6. Click Input/Output Behaviour.
7. In the Inputs/Outputs list, select the PIR’s double-knock input (I0515 in the example). Use the
Inputs: PIRs filter to reduce the list of inputs/outputs.