User manual

User Manual ADPRO
®
XOa Client Software
128 21796_05_preliminary
16 PIR Settings
16.1 Required PIR Firmware
For a correct functioning of the PIR alarm processing, a minimal PIR firmware version 2.00 is required.
Previous firmware versions also work with RS-485 communication, but do not support all features (e.g. Alarm
Management).
16.2 Connecting the PIRs
For physically connecting the PIRs to the server, see the FastTrace 2 Hardware Installation Manual.
Note
From firmware version 2.6 onwards, a separate PIR-HLI application license is required to
configure the PIR devices. For more information, see Application Licenses on page 154.
16.3 Configuring the Software Settings
16.3.1 Configuring the Serial Port
You need to set the serial port to PIR. Open the Serial Ports / PTZ window via System > Connections >
Serial Ports / PTZ.
Select the desired serial interface from the list and click Edit. The Properties section will appear to the right.