User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 127
When motion is detected in the detection zone, the border of the zone turns red.
Click Save to apply the new settings.
To remove a motion detection zone, select the detection zone and click Remove.
Click Save to apply the new settings.
15.2.7 Sabotage Detection
When a device is being tampered with, the sabotage detection will generate a so-called tamper alarm. This
can be activated per camera. In order to do so, tick the option in the section Sabotage detection.
The following actions with the camera will result in a tamper alarm:
 the lens is covered
 the position of the camera is altered
 the zoom of the camera image is changed
 the focus of the camera image is changed
When a tamper alarm is being generated on a certain camera, the green colour for status will change to red.
The tamper alarm on the camera should be cleared manually. To clear the tamper alarm on the camera, click
Clear alarm.
Click Save to apply the new settings.