User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 119
Parameter
Description
Default value
CMS ID
Sender signature (this number has to match the number
programmed in the alarm management software)
3141593
Server Unit ID
Site identification number (1–9999).
This number has to be unique for each video system that
sends alarms to the same computer.
1
Site name
Name of the site. This information is required if connecting to
Central Video software. The site name can also be displayed
on the camera images.
Site name
Connection timeout (s)
Disconnects automatically if no more data is exchanged for
the specified time duration.
15 (seconds)
Hold time (0 = no
repeat) (s)
This specifies a delay, expressed in seconds, before re-
attempting to connect, when a connection error occurred. If
“0”, the system will not try again (= only recommended if a
backup connection is available).
600 (seconds)
14.2 Primary Alarm Transmission Settings
Parameter
Description
Default value
Line test
 None;
 Interval: this will send a life check message every x minutes.
To make sure this functions correctly, the message (I0034 –
[SYST] – Primary lifecheck) needs to be configured with a
correct alarm profile!
Also set the time on which the first alarm transmission
should be sent.
Note
For dial-up networks it is recommended to
execute the line test less frequently, because of
the connection cost (e.g. 1 test a day).
None