User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 115
Select the Arm/Disarm input check box; modify the settings if necessary, and click Save to apply the new
settings.
13.7 Activating Outputs
To activate an output, open the Input/Output Behaviour window via System > Behaviour > Input/Output
Behaviour.
Select an output from one of these groups:
 On the box: outputs on the OTB I/O cards, 8 outputs on the first set (MIO and EIO cards) and 8 outputs
on the second set.
 Network: outputs available on the Net I/O modules, connected to the Ethernet.
 VM22A: an output that activates the corresponding loudspeaker on the VM22A audio.
 Workbits: virtual outputs that can be used to store internal states.