Service manual

ManualsBrandsVideoswitch ManualsComputer equipmenti305

CAUTION:

Before servicing this chassis, it is important that the service technician read the “Safety

Precautions” and “Product Safety Notices” in this service manual.

ATTENTION:

Avant d’effectuer l’entretien du châassis, le technicien doit lire les «Précautions de sécurité»

et les «Notices de sécurité du produit» présentés dans le présent manuel.

VORSICHT:

Vor Öffnen des Gehäuses hat der Service-Ingenieur die „Sicherheitshinweise“ und „Hinweise

zur Produktsicherheit“ in diesem Wartungshandbuch zu lesen.

SERVICE MANUAL

MANUEL D'ENTRETIEN

WARTUNGSHANDBUCH

Data contained within this Service

manual is subject to alteration for

improvement.

Les données fournies dans le présent

manuel d’entretien peuvent faire l’objet

de modifications en vue de perfectionner

le produit.

Die in diesem Wartungshandbuch

enthaltenen Spezifikationen können sich

zwecks Verbesserungen ändern.

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

PlasmaTV

May 2007

SM016

P50T01E

P50T01U

P50TP01E

P50TP01U

P42T01E

P42T01U

P42TP01E

P42TP01U

Summary of content (77 pages)

PAGE 1
SM016 SERVICE MANUAL MANUEL D'ENTRETIEN WARTUNGSHANDBUCH CAUTION: P50T01E P50T01U P50TP01E P50TP01U P42T01E P42T01U P42TP01E P42TP01U Before servicing this chassis, it is important that the service technician read the “Safety Precautions” and “Product Safety Notices” in this service manual. Data contained within this Service manual is subject to alteration for improvement.
PAGE 2
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Contents 1. 2. 3. 4. 5. 6. 7. Features ----------------------------------------------- 2 Speciﬁcations ----------------------------------------- 4 Servicing ----------------------------------------------- 5 Component names ---------------------------------- 6 Adjustment -------------------------------------------- 9 Troubleshooting ------------------------------------ 14 Self-diagnosis function --------------------------- 26 8.
PAGE 3
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PRECAUTIONS Cleaning the plasma screen panel of the monitor Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet. To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If this is not sufficient, use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
PAGE 4
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Digital Terrestrial Television Broadcasting Converting to digital signal enables more channels and add various useful features, such as Electric Programme Guide, Digital Teletext and so on. Further, digital signal can create a high quality picture. This logo indicates that the product is compliant with European Digital Broadcasting. DVB is a registered trademark of the DVB Project. This logo indicates that the product is set up to view digital terrestrial TV.
PAGE 5
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 2. Specifications Panel Display dimensions Approx. 50 inches Approx. 42 inches (1106(H) x 626(V) mm, diagonal 1270mm) (930(H) x 523(V) , diagonal 1060mm) Resolution 1280(H) x 1080 (V) pixels 1024(H) x 1080 (V) pixels including Stand: including Stand: 1240(W)x883(H)x423(D) mm 1060(W)x780(H)x360(D) mm excluding Stand: 1240(W)x821(H)x128(D) mm excluding Stand: 1060(W)x710(H)x110(D) mm including Stand: 47.0kg including Stand: 36.2kg excluding Stand: 41.
PAGE 6
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 3. Service points Lead free solder This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C). Lead free solder indicator Printed circuit boards using lead free solder are engraved with an "F.
PAGE 7
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 4.
PAGE 8
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Remote control] 1 Sub Power 2 Function Select (TV/DTT, DVD, SAT) Press these buttons to select function mode. The selected button blinks once. Normally, select “TV/DTT”. 3 Programme Select/Input Mode [Page Select] Press these buttons to select a TV programme directly. You can also use these buttons when changing the Input mode. 4 Freeze/Multi Mode [Hold] Press this button to change the picture to freeze mode. Press it again to return to normal picture.
PAGE 9
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Terminal Positions] 14 [Example: 50’’ models] 8 13 1 2 9 11 12 10 Rear 7 6 3 4 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Power Cord Socket Aerial Socket AV1 AV2 AV3 AV4 Monitor Out Service use only Service use only Power Swivel Terminal Optical Out (Digital Audio) HDMI 2 Mini stereo for Audio Common interface slot 42’’ models Front 50’’ models 19 18 17 16 15 16 17 18 19 15 AV5 Headphone terminal HDMI 1 SD Memory Card slot Photo Input terminal Conne
PAGE 10
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 5. Adjustment Ɣ Activating Adjustment Mode Use the remote controller with the set turned on to activate adjustment mode. Press the Programme Select button “1”, “GREEN” and “YELLOW” colour button at the same time and hold for more than 3 seconds. The set displays adjustment mode. Ɣ Changing data and Selecting Adjustment code When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control may be used as adjustment keys.
PAGE 11
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 50PDP Vs and Va Adjustment Item Power Unit Vs, Va Adjustment Procedure (1) Turn Vs ADJ to adjust Vs voltage to within ±0.1V of the value specified in the label on the panel. 1 Adjust within ±1V at Vs1 2 Adjust within ±0.1V at Vs2 Preparation (1) Turn on the set and perform pre-heat run for more than 1 min on burn-in screen. (2) Turn Va ADJ to adjust Vs voltage to within ±0.1V of the value specified in the label on the panel.
PAGE 12
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E RGB Amplitude Adjustment (AV Component Input) Composite video Adjustment Item Preparation (1) Allow the set to heat-run for more than 20 minutes before the final adjustment. (2) Input composite video adjustment signal into AV1 terminal. Procedure (1) Receive composite video adjustment signal at AV1 terminal input. Characters must not be present in both patterns of Black and White. (2) Go into Service Adjustment Menu and select “RGB”.
PAGE 13
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Video Colour Temperature Adjustment Item Video Colour Temperature Adjustment (Cool) Preparation Procedure (1) Set the signal generator output to white raster. (Window ratio: 100%) (1) Perform the following adjustment with the remote control: (2) Component signal (576i or 480i) Video level: 0.700Vp-p Sync level: 0.300Vp-p Setup level: 0V (2) Set the CRT colour analyzer (CA-100) at the centre of the panel.
PAGE 14
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Item Video Colour Temperature Adjustment (Warm) Preparation Procedure (1) Set the signal generator output to white raster. (Window ratio: 100%) (1) Perform the following adjustment with the remote control: (2) Component signal (576i or 480i) Video level: 0.700Vp-p Sync level: 0.300Vp-p Setup level: 0V (2) Set the CRT colour analyzer (CA-100) at the centre of the panel. (3) Input white raster signal into AV4 Component input terminal.
PAGE 15
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 6. Troubleshooting Burn-in mode This mode displays test patterns of some single colour rasters in turn. These signals are produced by the built-in generator of the panel. So it can be presumed that the panel has a problem when the Burn-in mode screen is abnormal. Using the remote control with the set turned on can activate the mode. Press the “MENU”, “recall”, “9”, “OK” in turn for less than 2 seconds.
PAGE 16
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 2 LED lights blue. Are the voltages of PPM1 and PPM2 connector of MAIN PCB normal? Change MAIN PCB or EPM1/2 (cable). If no improvement, go toto No Power Supply Unit Troubleshooting Yes [PPM1] Pin1/4/5/6 (+5.0V) Pin7/8 (+3.3V) [PPM2] Pin1/2/3 (+5.6V) Pin7 (+10V) Pin9 (+16V) Pin13/14/15 (+12V) Does PDP Burn-In mode operate normally? No PDP module Yes B Go to PictureTroubleshooting 3 LED blue blinks blue.
PAGE 17
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [50PDP Power unit] A Is input voltage applied to Power supply unit ? (CN61 (1),(3)) 㪥㫆 Change AC Fuse F9A2 T6.3AH 㪰㪼㫊㩷㩷 Are the voltages 㪥㫆 applied to CN63 (1)(3), and CNPPS (1)(7)(9)(13) of Power supply unit ? [CN63] (1) +5.3V / (3) +3.3V [CNPPS] (1) +5.6V / (7) +10.6V (9) +16.5V / (13) +11.2V 㪰㪼㫊 Go to Picture troubleshooting Change Power supply unit *Re-adjustment is reqired. Refer to 'Power Unit Vs ,Va Adjustment' page.
PAGE 18
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Picture troubleshooting] B No picture, no colour or dark Are all inputs not reflected? No a Yes Change MAIN PCB a Digital format signals Analog format signals Which input is abnormal? HDMI No Are all Analog format signals abnormal? DTT Which Digital format signal is abnormal? Yes b Go to HDMI troubleshooting Go to DTT troubleshooting c d Change MAIN PCB.
PAGE 19
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Picture: RF (analog) troubleshooting] e RF (analog tuner) Are voltages of pin3(+5V)/15(30.
PAGE 20
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Picture: Composite & S-video troubleshooting] f Composite and S-video Does a phenomenon appear if you change a RCA or Mini DIN cable? No Change RCA or Mini DIN cable Yes Are waveforms at Pin6(CV output) of IM06 of MAIN PCB normal? No Change MAIN PCB If no improvement, change Terminal PCB Yes Change MAIN PCB [Picture: RGB & Component troubleshooting] g h RGB Component Does a phenomenon appear if you change a SCART cable? Yes Are waveforms at Pin5(R o
PAGE 21
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Picture: DTT troubleshooting] d DTT Check if DW01 of SLOT PCB lights? Yes Change MAIN PCB or SLOT PCB No [IWP1] Pin4 (+3.3V)/5(+5.6V) [IWP2] Pin2/3 (+5.6V)/7/8(+3.3V) [IW02] Pin2 (+5.6V)/4(+3.3V) [IW03] Pin1/3 (+2.5V)/5(+1.2V) [IW04] Pin1/5 (+3.3V)/4(+2.
PAGE 22
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Picture: HDMI troubleshooting] c HDMI Yes Does a phenomenon appear if you change a HDMI cable? Change HDMI cable No Are both inputs abnormal? Yes Change MAIN PCB No HDMI1 HDMI2 Which input is abnormal? HDMI1 HDMI2 Change MAIN PCB Are waveforms at pin13/14/16/17/20/21/23/24 of I405 of MAIN PCB normal? Yes No Change SD PCB or EMH (FFC cable) If no improvement, change MAIN PCB Change MAIN PCB 21
PAGE 23
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Sub Picture troubleshooting] No picture, no colour or dark Change MAIN PCB If no improvement, change Terminal PCB [Teletext troubleshooting] No Teletext (analog) Are the signals of QM14/15(CV input) of MAIN PCB normal? Yes Change MAIN PCB If no improvement, change Terminal PCB 22 No Change MAIN PCB
PAGE 24
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [Sound troubleshooting] C Sound is abnormal Yes Are all inputs no sound? D No Which input is abnormal? RF (analog)/ AV1/2/3/4/5 HDMI Same as HDMI (Picture) troubleshooting Same as DTT (Picture) troubleshooting d c Are all analog inputs with no sound? DTT No Yes Change MAIN PCB If no improvement, change Terminal PCB RF (analog tuner) AV1/2/3/4/5 Which input is abnormal? RF (analog tuner) AV1/2/3/4/5 E Change Terminal PCB If no improvement, chan
PAGE 25
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E E D Are signals to PSPK connector of the MAIN PCB normal? No Yes Are the voltages of pin3 (+5V)/15(+30.
PAGE 26
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E [USB troubleshooting] No Picture No Does a phenomenon appear if you change a USB cable & EMH (FFC cable)? Change USB cable or EMH (FFC cable) Yes Are the voltages of pin4(+5.6V)/5(+5.0V) of I4U1 of MAIN PCB normal? No Change MAIN PCB Yes Change SD PCB If no improvement, change MAIN PCB [SD Card troubleshooting] [SWIVEL troubleshooting] No Picture Are the voltages of pin4/5/6/7(+3.
PAGE 27
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 7. Self-Diagnosis Function PDP panel self-diagnosis function This function is for a PDP panel failure with no picture. Panel failure is automatically self-diagnosed. It is shown by the blinking of the power indicator light (blue). The next table shows the PDP PCB in which failure most probably would be allocated according to the number of blinks.
PAGE 28
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Digital module self-diagnosis function At main microcomputer startup, hardware (mainly LSI) is checked by a self diagnosis program. To enter this Self-Diagnosis mode, follow the following steps: Procedure: 1) Enter Adjustment Mode. 2) Select SELF TEST and press OK button. 3) SELF TEST screen is displayed. 4) Each code is displayed in a SELF TEST screen. A diagnosis result is displayed with a numerical value to the right side of each code.
PAGE 29
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 8. Block diagram SLOT BOARD IW01 XC3S50-5PQG208C Oberon2 JW01 SLOT IWP1 TK11133CSC +3.3V_REG IW02 SI-3012KM +3.3V_REG IWP2 TPS62040DGQR +3.3V_DC/DC IW03 MM3141CNRE +1.2V_REG CK53731U MPEG SlowBus IW04 TK11125CSC +2.5V_REG MAIN BOARD SUB AREA RS-232C TERMINAL BOARD SM016 IE09 TK11130CSC +3.
PAGE 30
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 9.
PAGE 31
P50T01U/E P50TP01U/E 10. Wiring diagrams Ferrite Core Sizes: Large (P/N GX00667): NVS05, NVS06, NVS10 Medium (P/N GX00666): NVS01, NVS02, NVS03, NVS04, NVS07, NVS08, NVS09, NVS11. (For P50T01U, P50T01E, P50TP01U and P50TP01E) Use 11 in total when 1 includes a harness product ferrite core. CAUTION (Connectors) Do not grip in the direction of the arrow to avoid defects such as breaking the wire and/or opening the pin connector part. This is because the core is thin. PURSE LOCK Æ 5.0 (P/N 3749612) Æ 8.
PAGE 32
P50T01U/E P50TP01U/E (For P50T01U, P50T01E, P50TP01U and P50TP01E) To Power Unit To Power Unit To Power Unit To Power Unit To Power Unit To Power Unit Slot Board Insert ECN1 (LVDS Cable) in MAIN Board, EC01 first. Main Board Filter Board To SP To SP To LED Board To Control Board To SP To SP EFAC Preparation: Secureyl insert Faston of EFAC in the terminal of the inlet as follows: To LED Board PS Process To Control Board SM016 WIRING DIAGRAM - 2 31 NOTES: 1.
PAGE 33
P42T01U/E P42TP01U/E (For P42T01U, P42T01E, P42TP01U and P42TP01E) PURSE LOCK Æ 5.0 (P/N 3749612) Æ 8.5 (P/N NJ04411) Æ 11.5 (P/N NJ04401) Ferrite Core Sizes: Large (P/N GX00667): NVS05, NVS06, NVS10 Medium (P/N GX00666): NVS03, NVS04, NVS07 NVS11, NVS12 For FFC (P/N GX00751) NVS01. Use 9 in total when 1 includes a harness product ferrite core.
PAGE 34
P42T01U/E P42TP01U/E To Panel (For P42T01U, P42T01E, P42TP01U and P42TP01E) To Power Unit To Power Unit To Panel To Power Unit To Power Unit Slot Board Insert ECN1 (LVDS Cable) in MAIN Board, EC01 first. Main Board Filter Board To SP To SP To LED Board To Control Board To SP To SP EFAC Preparation: Secureyl insert Faston of EFAC in the terminal of the inlet as follows: To LED Board PS Process To Control Board SM016 WIRING DIAGRAM - 2 33 NOTES: 1.
PAGE 35
P50T01U/E P50TP01U/E 11.
PAGE 36
P42T01U/E P42TP01U/E (For P42T01U, P42T01E, P42TP01U and P42TP01E) SM016 ASSEMBLY DRAWING 35
PAGE 37
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E THE UPDATED PARTS LIST FOR THIS MODEL IS AVAILABLE ON ESTA 36
PAGE 38
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 13.
PAGE 39
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 㪠㪤㪇㪈㩿㪩㪀㩷㪈㪌㫇㫀㫅㪠㪤㪇㪈㩿㪞㪀㩷㪏㫇㫀㫅㪈㪅㪈㪎㪭㫇㪄㫇㪈㪅㪍㪎㪭㫇㪄㫇㩷㩷㩷㪈㪟㩷㩷㩷㪈㪟㪠㪤㪇㪈㩿㪙㪀㩷㪊㫇㫀㫅㪚㪏㪊㪍㩿㪩㪀㩷㪘㪄㪚㪿㫀㫇㩷㫀㫅㪈㪅㪈㪎㪭㫇㪄㫇㪇㪅㪎㪭㫇㪄㫇㩷㩷㪈㪟㪈㪟㪚㪏㪊㪈㩿㪞㪀㩷㪘㪄㪚㪿㫀㫇㩷㫀㫅㪚㪏㪊㪋㩿㪙㪀㩷㪘㪄㪚㪿㫀㫇㩷㫀㫅㪇㪅㪎㪭㫇㪄㫇㪇㪅㪎㪭㫇㪄㫇㪈㪟㪈㪟㪩㪤㪊㪉㩷㩿㪟㪀㩷㪠㪤㪇㪈㩷㫆㫌㫋㪩㪤㪊㪊㩷㩿㪭㪀㩷㪠㪤㪇㪈㩷㫆㫌㫋㪊㪅㪊㪭㫇㪄㫇㪊㪅㪊㪭㫇㪄㫇㪈㪟㪈㪭 38
PAGE 40
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Circuit diagram list MAIN 1 (P50T01U/P42T01U) ........................ 41 MAIN 2 (P50T01U/P42T01U) ........................ 42 MAIN 3 (P50T01U/P42T01U) ........................ 43 MAIN 4 (P50T01U/P42T01U) ........................ 44 MAIN 5 (P50T01U/P42T01U) ........................ 45 MAIN 6 (P50T01U/P42T01U) ........................ 45 MAIN 7 (P50T01U/P42T01U) ........................ 47 MAIN 8 (P50T01U/P42T01U) ........................
PAGE 41
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Circuit diagram list SUB 1 (P50T01U/P42T01U).......................... 58 SUB 2 (P50T01U/P42T01U).......................... 59 SUB 3 (P50T01U/P42T01U).......................... 60 SUB 4 (P50T01U/P42T01U).......................... 61 SUB 5 (P50T01U/P42T01U).......................... 62 SUB 1 (P50T01E/P42T01E) .......................... 58 SUB 2 (P50T01E/P42T01E) .......................... 59 SUB 3 (P50T01E/P42T01E) ..........................
PAGE 42
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E SBCE7_N SBCE6_N SBCE5_N 1 3 1 3 5 7 AJ5 AJ6 AJ8 SBCE2_N AJ11 SBCE1_N AJ12 SBCE0_N AJ13 SBWE_N AJ7 SBoE_N AL4 R106 47 1010 47 47 R109 SBCLK AK14 SBBE0_N AJ10 SBBE1_N AJ9 share pin mode 00101 : mode 5 (2bit) SBADD3 L:DDR Width bit 64bit H:DDR Width bit 32bit BOARD VISION SBADD5:Reserved(Pull Up) SBADD6:Reserved(Pull Up) SBADD7:Slow Bus Ch0 Boot SBADD8:Slow Bus Ch0 Boot SBADD1:PCI Mode Host SBADD2:PCI Arbiter Internal SBADD4:DDR Data Rate 333MHz SBADD9:
PAGE 43
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 9 10 11 12 13 14 15 16 TC90411XBG 8 7 6 5 4 3 2 1 CK53761U A23 B23 C23 D23 E23 p/u p/u O/D & p/u p/u p/u UARXD1 UARTS1_N UATXD1 UACTS1_N UA1EXCLK A24 B24 C24 D24 E24 p/u p/u UARXD2 UARTS2_N UATXD2 UACTS2_N UA2EXCLK D21 B20 E21 A20 C21 UARXD3 UARTS3_N UATXD3 UACTS3_N UA3EXCLK D22 A21 E22 A22 *R210 TUNiRQ1_N TUNiRQ0_N 10K UARTS3_N UACTS3_N UARXD0 UATXD0 *R211 10K *R212 10K *R213 10K *R216 *R217 SD CARD 1/0 = WP oN/oFF 1/0 = not det/det I2C ch0 *
PAGE 44
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model. I101 TC90411XBG GND1 0.1/16 0.1/16 0.1/16 0.1/16 1 005 1 005 1 005 1 005 C307 C308 C309 C310 0.1/16 0.1/16 0.1/16 0.1/16 1 005 1 005 1 005 1 005 C311 C312 C313 0.1/16 1 005 0.1/16 1 005 0.1/16 1 005 C314 C315 C316 C317 0.1/16 0.1/16 0.1/16 0.1/16 1 005 1 005 1 005 1 005 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C328 C329 C330 C331 C332 C333 C334 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.
PAGE 45
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E +2.5V REG G5 G5 G4 G4 G2 G1 1 2 3 5 4 3 2 1 10K R4E6 2SC4617 F1 E1 9 10 11 12 13 14 15 17 +5V HTPLUG G6 G6 G7 G7 100K C404 18 16 2SC4617 GND R401 0 L401 10 uH 2125 GND1 GND1 *J402 *R475 DC1R019WDB *R474 0 *R427 0 0 L405 10 uH G3 G3 G5 G5 G2 G1 GND1 GND GND 1 G4 G4 2125 Data2+ GND1 3 GND_T GND 4 2 16 15 14 13 12 11 10 9 Data2- 5 *R464 0 SDA 100 C401 EZJZ0V80010 1 2 3 4 5 6 7 8 SCL 19 1.0K R416 Q401 Q402 N.C.
PAGE 46
CARDRST_N TUNRST_N SHEET_16 Virtual connector SHEET_6 Seine2_D SHEET_10 C/I SHEET_16 Virtual connector SHEET_18 Virtual connector RESET1_N SHEET_9 Seine2_A SHEET_16 Virtual connector SHEET_17FC8 RESET2_N SHEET_15 Sub Micro SREST SHEET_1 Beckham SHEET_11 Panel PNLRST EJTAGRST_N WDTRST_N EXTRST_N SHEET_1 Recet SHEET_18 Virtual connector T_CNF_DATA T_CNF_DCLK SHEET_4 HDMI SHETT_17 FC8 ADC1_oE HDMI_oE PoWER_2 PDWN HDMi_SEL EDiD_WP EXTLD ASP_Reset AMCLK1_SEL AMCLK0_SEL SHEET_13 Audio SHEET_14 P
PAGE 47
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E I101 8REN 7 6 10 9 8 10K 1 2 3 4 5 1 2 3 4 5 *R623 *R622 8REN 8REN 10K 10 9 8 7 6 10 9 8 7 6 10K *R621 1 2 3 4 5 8REN 10 9 8 7 6 10K *R620 1 2 3 4 5 1 2 3 4 5 *R619 8REN 10K 7 6 10 9 8 Parts marked with hatching are not mounted in this model.
PAGE 48
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E +2.5V REG53mA Max 53mA Max 1005 1005 1005 1005 2125 C897 0.1/16 C899 0.1/16 C887 0.01/16 1005 C889 0.1/16 1005 C888 5.0p-C R865 1.2K C880 22p-C 1005 12K 1005 4.7/16 2125 1005 1005 1005 2125 C8A3 0.0015 1005 C8A4 0.1/16 1005 GND_S2A GND_S2A 0.001 1005 C875 +9.0V REG C8A5 GND1 R873 9.0p-C 1005 C8A7 1.0M-1% B2 A3 A2 B3 VDDXo[3.3] XoiN XooUT VSSXo PLL3 R8A1 0 GND1 I102 YAT-050 1.7V R881 I102 Composite/480i 0.
PAGE 49
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E I102 YAT-050 YAT-050 SCL0_3V_400 CK53853U CK53853U Seine2-A 7/9 GND1 AD23 RESET AD22 TESTS I902 PoWER_2_Td Vcont GND Np CK37216R 1 2 3 (200mA max) S2A+2.5V (15mA max) C906 4.7/6.3 I903 C908 1.0/6.3 5 4 Vout R903 4.7K I904 CK37219R 1 2 3 C909 4.7/6.3 R905 2.7K C910 0.1/16 R904 1.0K GND1 Np 3 GND 2 (185mA max) Vcont Np 1 S2A+1.5V C907 0.1/16 GND R902 1.0K Vcont CK37212R +1.5V REG Vin Vout TK11125CSC +2.
PAGE 50
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model. LVDS, LVTTL I/F T S I/F LVDS Input *I101 TS i/F from POD to Tenko4 C/I I/F TC90411XBG TSPi_SYNC TSPi_EN CK53761U M2 RCLK2_N M1 RCLK2 *RA10 1 00 N2 RD2_N N1 RD2 T2CLKM T2CLKP T2DM T2DP D+3.3V *LA01 30uH 2125 *CA01 1.0/16 *CA02 0.1/16 1005 *CA03 0.01/25 1005 GND CE 2 3 PWR2-H6 PWR2-K6 PWR2-M6 PWR2-P6 P3 G6 J6 L6 N6 RA2VREF GND2-G6 GND2-J6 GND2-L6 GND2-N6 4.7/6.
PAGE 51
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model. Panel-IF LVDS IPS - µ (VSYNC_60Hz) VSYNC *EC02 SHEET_5 Nereid *RC13 100 1.2K *RC14 0 *RC03 *RC37 P# EA04058R G2 BL_PWM ---> DC (0~3.3V) G1 BL0PWM UART2 *RC38 100 8 *RC39 100 7 *RC40 100 6 *RC16 100 5 *RC15 100 4 LCD_CTS_N LCD_RTS_N PNLoN BL_oN +9.0V REG RC75 510K-1% RC12 10K VDD_12V 2125 *RC41 100 DooR_ALT *RC42 100 FAN_ALT G10 G9 B_W0.547V B_W0.2735V 0.07mA 4.
PAGE 52
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PoWER_2_Td SHEET_14 Power LE01 Parts marked with hatching are not mounted in this model. 116mA 30uH VCXO STC0 6 7 RE03 PLL_18M_2 PLL_36M PLL_18M_1 8 47 GND1 G1 CY22391-04 CK56141R 23 22 21 20 RE11 33 19 18 17 9 10 11 12 13 14 15 16 CE08 0.1/16 22 5 IE01 AVSS_1 AVSS_2 VSS_A1 VSS_A2 18.432M-1 24 RE10 4 CE07 0.
PAGE 53
3 RF17 4 5 6 SRC1 2A4 2Y3 1Y2 1A3 2A3 2Y2 1Y3 1A4 2A2 2Y1 1Y4 SHEET_2 Seine2_D Seine2 D-chip DAC2 1005 CFP2 0.047/25 1005 10K CFP1 0.047/25 RFN4 10K RFN5 CFN7 0.1/16 1005 CFN6 4.7/16 2125 CFN5 *RFR3 0 *CFR8 10/10 *RF82 11 10K 9.0V 10 9 8 *RFR6 100 *CFR9 10/10 2125 AEP_L *RFR7 100 2125 AEP_R *CFP4 0.047/25 1005 7 12 Virtual connector 1005 13 6 ASP_R 10K 47 47 47 47 47 47 47 47 ASP_L *CFP3 0.
PAGE 54
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PPM1 502386-8H 1 PoWERoFF SHEET_1 Beckham SHEET_9 FC8 SHEET_15 Sub Micro SHEET_16 Virtual con SBY+5.0V RG25 47 +5.6V 3 VSS 6.5A GND1 *CG37 150/10 PXA CG36 150/10 PXA 10/10 2125 CK51856R IN SW 1.2K-1% RG06 RG99 10K-1% MP2361DK FB GND EN COMP NC-3 Detector CG56 4.7/6.3 CG57 0.1/16 1005 [Delay line] t(msec) = 47 (nF) X 5.7 (4.3~7.2) = 270 (202~338) CG58 0.01/16 1005 D+3.
PAGE 55
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E AViRSEL HP_DET C1_iN iRoFF 107 IRPoL F_RXD 39 108 START F_TXD 38 JiG_PLED 37 27K RH94 10K 110 SVREF M1 36 111 TEST2 TEST1 35 0.1/16 iRC-27 AVCRXD AVCTXD 16 17 18 19 20 21 22 23 24 25 26 27 28 29 2 3 1 1.0k 1010 4 100 TPH7 TPH8 TPH9 TPHA 3 1 3 1 2 4 RHH1 10k 1010 RHH0 1.0k 1010 2 S D 3 1010 1 S 4 2 RHG9 S 1.0k SHEET_16 Virtual connector TVS_L SBY+3.
PAGE 56
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Virtual connector (Main-Sub) Virtual Connector-20pin PVIR6 1 3 5 7 9 11 13 15 17 19 +5.6V SHEET_14 Power SBY+5.0V +16V GND +5.6V +5.6V +5.6V +5.6V GND SBY+5.0V GND +16V GND GND D+3.3V D+3.3V D+3.3V GND GND SBY+3.3V GND +10V SWiVEL_G 2 4 6 8 10 12 14 16 18 20 GND1 D+3.3V +10V SWiVEL_G SBY+3.
PAGE 57
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model. *PMF1 501497-160VS 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107 109 111 113 115 117 119 121 123 125 127 129 131 133 135 137 139 141 143 145 147 149 151 153 155 157 159 +5.6V SHEET_14 Power CK91 0.1/16 1005 D+3.3V CK93 0.
PAGE 58
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Virtual connector (Strage-Main) Parts marked with hatching are not mounted in this model.
PAGE 59
SM016 CBE0_N SToP_N CBE1_N DVSEL_N CBE2_N GNT2_N CBE3_N REQ2_N SERR_N LANiNT_N PERR_N PAR iRDY_N FRAME_N TRDY_N PCiAD26 PCiAD27 PCiAD28 PCiAD29 PCiAD30 PCiAD31 PCiAD24 PCiAD25 PCiAD22 PCiAD23 PCiAD18 PCiAD19 PCiAD20 PCiAD21 PCiAD16 PCiAD17 PCiAD8 PCiAD9 PCiAD10 PCiAD11 PCiAD12 PCiAD13 PCiAD14 PCiAD15 PCiAD6 PCiAD7 PCiAD0 PCiAD1 PCiAD2 PCiAD3 PCiAD4 PCiAD5 PCiCLK_L RESET1_N 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 Virtual Connector-60pin GND PCiAD24 PC
PAGE 60
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PJP PERR_N LANiNT_N SERR_N REQ2_N CBE3_N GNT2_N CBE2_N DVSEL_N CBE1_N SToP_N CBE0_N PAR GND GND TRDY_N FRAME_N iRDY_N PCiAD31 PCiAD30 PCiAD29 PCiAD28 PCiAD27 PCiAD26 PCiAD25 PCiAD24 PCiAD23 GND GND PCiAD22 PCiAD21 PCiAD20 PCiAD19 PCiAD18 PCiAD17 PCiAD16 PCiAD15 PCiAD14 PCiAD13 PCiAD12 PCiAD11 GND GND PCiAD10 PCiAD9 PCiAD8 PCiAD7 PCiAD6 PCiAD5 PCiAD4 PCiAD3 PCiAD2 PCiAD1 PCiAD0 GND RESET1_N PCiCLK_L GND GND +5.
PAGE 61
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E 1 2mm 1V 2 3 4 5 0.3V CM37 0.1/16 1005 RM22 39 CM36 1005 CM38 0.1/16 1V 0.3V 0.1/16 1005 470 RM24 6 0.3V BIAS Parts marked with hatching are not mounted in this model. 1.7mA 0.3V IMZ1A *RM20 1.1K-1% VIDEO SW GND1 +5.0V 2 4 RM72 0 1010 2.7V 1 3 RM71 0 RM70 1.0K 2V 2V IN3B GND3 IN2A SW2 VCC IN2B GND1 IN1A CM80 10/10 2125 SCL1_3V_100 GND 3 CK55475R Hsync_INV. SM016 GND1 GND3 SUB BOARD CIRCUIT - SHEET 3 60 CM93 CM94 4.
PAGE 62
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E +5.0V +3.3V 2mm 2mm 1010 R001 10k 2 4 SHEET_5 TELETEXT 3 1 6 5 4 DTT_SC C3 1 4.7/16 2125 R046 3.3K Q008 2SA1774 Q007 2SC4617 R042 220 100 C056 120 R0G0 1.8K R044 R039 3.3K C018 390p 1005 R043 180 C019 180p-C 1005 2mm GND1 R054 3.7V 4mm C024 100 1.0/10 R056 C025 100 1.0/10 4V 2mm 2125 C026 0.01/16 1005 R057 100 R059 100 3.7V Q006 2SA1774 R040 SPD1 DTT_SY Y3 AV3_F_BLANK S-3 3 2 C027 4 3 2 1010 1 100 R070 100 R060 3.
PAGE 63
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E (TCK) (TMS) (TDI) (TDO) 11 12 13 15 P4.5/CS3 16 P4.4/A20 17 P4.3/A19 18 P4.2/A18 CK53251U 19 1005 23 27 A5 A10 VDD33-6 69 29 A11 VSS33-6 68 30 A12 D10 67 31 VSS33-2 D12 66 32 VDD33-2 D2 65 D4 CR20 0.1/16 1005 63 62 RR76 RR79 2.2K QR04 2SC4617 RR85 1.8K-1% 2.
PAGE 64
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PLAY/STOP 1 3 2 4 1 3 2 4 1 3 2 4 VOL_UP VOL_DOWN SNC6 SKHMPUE010 SNC7 SKHMPUE010 SNC5 SKHMPUE010 1 3 2 4 1 3 2 4 CH_UP CH_DOWN SNC3 SKHMPUE010 SNC4 SKHMPUE010 1 3 2 4 POWER_ON SNC2 SKHMPUE010 1 3 SNC1 SKHMPUE010 1 3 2 4 Parts marked with hatching are not mounted in this model. 1 GND1 5 5 5 5 5 RNC5 2.7K 5 2 5 4 RNC6 1.5K 5 2 RNC7 1.0K 10K RNC3 1.0K RNC2 5 RNC4 4.7K RNC8 GND1 2.
PAGE 65
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model.
PAGE 66
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model.
PAGE 67
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E Parts marked with hatching are not mounted in this model.
PAGE 68
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E PFAC J9A1 4 G002 2 1 3 4 Z112 C9A4 2200P/400 CS Z114 L9A1 1.5m 27x27 Z105 C9A2A 1.0 LE 3 SWIVEL BOARD To POWER UNIT NC-5 JSW 6 3 S9A0 4 SY17-2-1(U1D1)/T CSS5008-0711G Z110 EA02232R 8 7 6 5 G1 G2 1 2 3 4 L9A3 2.3 LIVE KL9A3 JUMPER Ø 0.6 1 F.G EGND1 2 MET37-0002 3 FILTER BOARD 5 4 SW_CoM iR+5V 3 2 MoToR- S/PDiT 3 1 JoiNT_DET ED01053 2 GND MET37-0002 F.
PAGE 69
P50T01U P42T01U Parts marked with hatching are not mounted in this model.
PAGE 70
P50T01U P42T01U Parts marked with hatching are not mounted in this model.
PAGE 71
P50T01U P42T01U Parts marked with hatching are not mounted in this model.
PAGE 72
P50T01U P42T01U Parts marked with hatching are not mounted in this model.
PAGE 73
P50T01E P50TP01E P42T01E P42TP01E IT12 2mm +3.3V +3.3V VOUT 5 NC 4 DIGITAL TUNER CK54331R RT26 0 GND1 RT16 0 SCL1_3V_100 SDA1_3V_100 4 2 CT12 0.1/16 3 1 +3.3V 1005 RT53 100 MTV_CVBS MTV_AFC +5.6V 2 4 +5.0V +3.3V 3.3V 3.3V 1 3 +1.2V CT13 0.1/16 1005 +9.0V RT17 10K 21 TSDATA6 AVDD_I/3.3V_alog 25 SCL 26 SDA 27 CVDD/1.
PAGE 74
P50T01E P50TP01E P42T01E P42TP01E FAN GND(FAN) 3 2 3 2 3 1 2 3 1 JRS1 G1 G2 4 RY42 0 RS-232C I/F PFA4 ZH-04V G1 G2 2 1608 1 G1 G2 G1 G2 GND1 YKF42-8064N 4 EQ00771 RY43 0 G1 (1) (4) (3) (2) G2 (5) GND1 3 XY03 NFM18PC105R0J3 1 ZH-04V GND(FAN) FANLOCK1 2 ZH-03V To FAN4 PFA3 FANLOCK4 FANVCC 1 G1 G2 PFA2 FANVCC 5 ZH-03V To FAN3 GND(FAN) 4 PFA1 FANVCC 3 GND(FAN) SCL2_3V_100 ALART 2 GH-05V To FAN2 FANLOCK2 SDA2_3V_100 1 To FAN1 PTMP1 FANVCC D+3.
PAGE 75
P50T01E P50TP01E P42T01E P42TP01E RXF2 220 EQ00741 RX17 100p-C CXA3 CXA4 RX46 75-1% 15 68K PR RX51 CX26 10/10 RX52 0 1.0K 2125 LX07 R 20 RX50 270K CX25 0.001 1005 2125 10uH RX49 270K CX24 0.001 1005 CX23 0.1/16 1005 CX22 R 1 K RX53 270K 1005 2 2125 W 6 MONITOR_L 7 RX58 12 0 LX08 2125 10uH RX59 2 4 CX30 10/10 0 1005 CX32 0.1/16 RX57 100k 1010 1 3 2125 CX33 0.
PAGE 76
P50T01E P50TP01E P42T01E P42TP01E HV01 GP1FSV51TK0F CZ01391 RV01 47 Vin 2 VCC 3 GND OPT_OUT 0 LV01 10uH 2125 2125 +5.0V 1 +5.0V CV10 10/10 SHEET_1 RV19 2mm G2 G1 GND1 Swivel Motor Driver 0 IV01 RIN/IN2 H L H L MODE RIGHT ROTATION LEFT ROTATION BRAKE STOP 0.4A/1.0mm 2mm GND 8 85mA 100 CV04 10/16 3216 CV05 10/16 3216 CK55331R DV03 5 TK86287AM1 RV18 0 1 2 0 0 RV16 RV17 3 4 LV02 CM04RC04T 4 5 Parts marked with hatching are not mounted in this model.
PAGE 77
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.