Operating instructions

1. General Description

Zelaris AS is a programme for use in the ﬁeld of access control.

The combination of eneo network cameras and/or AXIS components and the Zelaris AC Server software emulate

a video and two-way voice door control system. The network cameras/servers use the Ethernet in order to transmit

video, audio, and control data in the network. In combination with the Zelaris AC server they enable the building

entrance area or similar to be monitored from a PC workplace. When a visitor presses the door bell button, which

is connected to the alarm input contact, the PC presents the video image as a pop-up. The audio button integrated

into the software can activate the integral microphone in the connected components. A door-opener or similar device

can be operated by actuating the alarm output contact via the action button in the software.

The Zelaris AC enlarges the Zelaris AS by one workplace in each case.

• Client Version of the Zelaris control programme (only 76012)

• For the automatic surveillance of doors / vehicle barriers (only 76011)

• For the use of NW components from eneo and Axis

• Expansion to additional workstations (only 76012)

• Unlimited number of workstations (only 76012)

• Triggered by alarm contacts or Motion Alarm (only 76011)

• Pure software system

• Automatic switch-on and recording on PC

• Bi-directional audio transmission

• Available protocols: TCP/IP, FTP and SMTP

• Single workplace licence (only 76012)

Cameras and web servers supported

• eneo ENC1001L

• eneo ENC1001W

• eneo ENC1002L

• eneo ENC1002W

• eneo ENC1003L

• eneo ENC1003W

• eneo ENC1004L / GLC1401

• eneo ENC501L

• eneo ENC501W

• eneo ECS-01

• Axis MJPEG (complete product range)

• Axis MPEG4 (complete product range)

• Axis MPEG2 (complete product range)