Specifications

4
Tx - Transmitter
Figure 1
7. Video Input Brightness Adjust
8. RS485 Output
9. RS485 Data Receive L.E.D
10. Gain Control Switch
11. Power L.E.D
12. Power Input 12v D.C Only
Connections - TX Transmitter
Each CCTV Mule is clearly marked on the power side as: Tx - Transmitter
Rx - Receiver
Rx - Receiver unit has the following connections;
1. Channel 1 Video Output
2. Channel 2 Video Output
3. Channel 3 Video Output
4. Channel 4 Video or Audio Input - Output
5. Video Input from Mule Transmitter
6. RS485 Input
Figure 2
7. RS485 Data Transmit L.E.D
8. Switch, for Channel 4 Video Input or RS485
9. Gain Control Switch
10. Power Input 12v D.C Only
11. Power L.E.D
Connections - RX Receiver
Each CCTV Mule is clearly marked on the power side as: Rx - Receiver
Tx - Transmitter unit has the following connections;
1. Channel 1 Video Input
2. Channel 2 Video Input
3. Channel 3 Video Input
4. Channel 4 Video or Audio Input - Output
5. Switch, for Channel 4 Video Input or RS485
6. Video Output to Mule Receiver
Step 2 - identify the relevant connections on the Mule4.
CCTV Mule Instructions