Specifications

CCTV Mule Instructions

Tx - Transmitter

Figure 1

4. Channel 1 Video Input

5. Video Output to Mule Receiver

6. Channel 2 Video Input

Connections - TX Transmitter

Each CCTV Mule is clearly marked on the power side as: Tx - Transmitter

Rx - Receiver

Rx - Receiver unit has the following connections;

1. Gain Control Switch

2. Power Input 12v D.C Only

3. Power L.E.D

Figure 2

4. Channel 1 Video Output

5. Channel 2 Video Output

6. Video Input from Mule Transmitter

Connections - RX Receiver

Each CCTV Mule is clearly marked on the power side as: Rx - Receiver

Tx - Transmitter unit has the following connections;

1. Power Input 12v D.C Only

2. Power L.E.D

3. Video Input Brightness Adjust

Step 2 - identify the relevant connections on the Mule2.