Specifications

CCTV Mule Instructions
2
Carries multiple video signals even audio down ONE RG59 cable!
V1
V2
V1 & V2 in
this direction
1x RG59 co-ax cable
Mule 2 - Tx Mule 2 - Rx
The CCTV Mule makes it easy to add extra cameras to existing
installations, you save installation time and reduce the cost of
buying and installing more cable.
The Mules work in pairs. One Mule combines the video signals to transmit them
down 1 single co-ax, the other Mule then reconstructs the individual video
signals at the remote end. A low-cost, easy solution t
hat offers huge installation
benefits and opportunities to add extra cameras.
The clever electronics of the CCTV Mule also allow it to carry audio along the
same co-axial cable. You can even carry one video signal in one direction and
one in the other direction!
The CCTV Mules need a 12V power supply at both ends but other than that,
it’s a really simple device to use, with no real configuration to do.
2 Video signals down 1 co-ax cable
Mode
1
It has the following 4 operation modes...
12V DC
Step 1 - decide on the operation mode you require the Mule2 to work in...
ule
CCTV
TM
12V DC
V1
V2