QUAD040 Useful compact quad unit that can be wall mounted or desk mounted. Multiple display options make it indispensable to the professional CCTV engineer. Handbook & Instructions 4 Camera Inputs with 8 display options (see pg 14-17) ...
Introduction • • • • • • • • 8 Display Modes Wall Or Desk Mounted Compact Design Easy Channel Selection Built In Switcher Quad Display 12V DC Push Button Freeze Function The HandyQuad is a compact, simple to use quad and switcher combined. The HandyQuad can be wall or desk mounted, which along with its tiny size makes for a neat and easy installation. Free Remote All the HandyQuad’s functions can be controlled using the IR remote control, or the push buttons on the front of the unit.
Wall & Desk Mounting Wall Or Desk Mounting The HandyQuad The HandyQuad can be wall or desk mounted. 52mm To mount it on a wall, use 4 small headed screws into a wall using the spacing in the diagram on the left. The quad is held in position by lowering it on the screw heads. 97mm Alternatively you can simply sit the quad on a desk or shelf. 4 small self-adhesive feet are supplied with the quad that you can attach to the bottom of the quad if you are desk mounting it. www.handyquad.
Wiring Of The Quad DVR input is routed to “Monitor Output” by pressing the ‘DVR’ button on the HandyQuad, or the ‘PB’ button on the remote. DC 12V/1A CAM1 CAM2 CAM3 CAM4 DVR IN DVR OUT MONITOR OUT Just connect the 4 camera inputs to the BNC connectors labelled “CAM1-4”. The monitor simply connects to the BNC output labelled “Monitor out”.
Side Panel 1 2 CAM1 12V DC 3 4 5 6 7 8 CAM2 CAM3 CAM4 DVR IN DVR OUT MONITOR OUT No. 1 2 3 Description 12V DC Power Input Camera 1 Input Camera 2 Input No. 5 6 7 4 Camera 3 Input 8 Description Camera 4 Input DVR / VCR In DVR / VCR Out Displays Quad Screen Constantly Monitor Video Out (Composite Only) Powering the HandyQuad Our high quality, reliable AntiHum power supplies are ideal for use with the HandyQuad. We offer a 12V DC, 500mA power supply with an industry standard 2.
Front Panel 1 2 3 POWER ESC 4 5 No.
IR Remote Control Button MENU FRZ MENU PB ENTER ZOOM FRZ PB 1 A 2 B 3 AUTO 4 REMOTE CONTROL Function Button Menu / Exit ZOOM Freeze Current Image / ENTER 2x Unfreeze Up Left Display DVR / VCR Image / 2x Exit N/A Function Zoom / 2x Exit Zoom OK Down Right Quad View Start Auto-Switch N/A Dual PIP PIP Ch 1 Full screen 1x Vertical Split 2x Horizontal Split 3x Dual Display Ch 2 Full screen Ch 3 Full screen Ch 4 Full screen See opposite for setting channels in PIP, Dual PIP, Vertica
Menu System - Main Menu Main Menu The HandyQuad has a really simple and easy to use menu system. Pressing Menu on the IR remote control, or holding ESC on the HandyQuad’s front panel will display the Main Menu. From here the Up and Down arrows are used to select the option/field required. The Left and Right arrows are used to change values and Enter is used to confirm selection. Pressing Menu whilst in the menu system will go back one screen.
Menu System - System Setup System Setup The System Setup menu allows you to change the basic settings of the HandyQuad. The Date, Time, Video Format, Language and Key Lock can be adjusted and set in the System Setup menu. In the UK the video format needs to be set to P (PAL). www.handyquad.
Menu System - Display & Autoseq Time Setup Display Setup Autoseq Time Setup In the Display Setup you can configure the OSD, Display Resolution and Border Colour. It is also possible to alter the Screen Position by setting both the X and Y values. In this menu you can specify how long each channel is displayed for during auto switch view. If required channels can be set to ‘OFF’ so that they are not displayed. The CH 1-4 value is for the quad view.
Menu System - Channel Setup Channel Setup In Channel Setup you can configure each channel separately to get the best image possible. You are able to set the channel Title (Max 4 characters), Brightness, Contrast, Saturation, Hue and Sharpness. You also have the option to Mirror the image either vertically or horizontally. www.handyquad.
Menu System - Motion Setup Motion Setup In this menu you can configure Motion Detection for each channel. You can set the period of time you require Motion Detection to be enabled. Alternatively you can choose ‘Always On’ for constant detection. The Sensitivity, Velocity and Masking Area can also be set. (Once masking area has been set, move the cursor to the top of the frame to exit) The Sensitivity value can be set form -7 (Min) to +7 (Max).
Menu System - Event Setup & Report Event Setup Event Report The Event Setup menu allows you to set what events are logged in the Event Report. The Report Hold Time is the minimum amount of time after an event has been logged before an event of the same type on the same channel can be logged again. (The Buzzer is disabled on this model.) The Event Report menu displays a detailed list of all the events that have occurred. A maximum of 60 events can be recorded. www.handyquad.
Display Modes Full Screen Quad Each channel can be displayed full screen by pressing the corresponding button on the remote, or on the front of the HandyQuad unit. This makes it easy to quickly switch between camera inputs. Quad view is a great way to display all four images at once ensuring nothing is missed.
Display Modes PIP (Picture In Picture) Dual PIP (Picture In Picture) PIP is ideal for when you have a main camera that requires constant observation, but also a second location to keep an eye on. e.g. A main entrance and a side entrance to a property. Dual PIP works in the same way as PIP with the added benefit of a third image. The smaller image frames can be rearranged so as to not obstruct anything important in the main image. For channel and position setup see pg 6.
Display Modes Vertical Split Horizontal Split In Vertical Split mode you can display any two cameras side by side full screen. As this narrows the frame only the centre portion of each image is visible. Much like Vertical Split, Horizontal Split displays any two cameras stacked one on top of the other. Horizontal Split provides a wider field of view but again only the centre section of the image is displayed. For channel setup see pg 6. 16 For channel setup see pg 6.
Display Modes Dual Display Auto Switching A great way to view two cameras at the same time. The full image of both cameras is displayed. Auto switch constantly cycles through all four camera inputs and the quad display. The amount of time each channel is displayed can be adjusted. Each camera can be turned off if not required during auto switch. For channel setup see pg 6. www.handyquad.
Other Products To Consider - CAM220 Dome Camera • Auto Digital Zoom • Dual Voltage 12V DC, 24V AC • Built in Balun • Pelco D - (RS485 2 wire) • Pelco C - (Up the co-ax) • 700TVL colour mode - 800TVL B&W mode • NiteDevil low light – 0.00019Lux • Internal connections – no flying lead • Vandal-proof & Weatherproof • 3 Axis Gimbal for wall or ceiling mounting • Mega-pixel 2.
Other Products To Consider - CAM220 Dome Camera 1 Zoom Adjustment 3 Unlocking this screw allows you to adjust the zoom in and out of the camera. 2 Tilt Axis Unlock this screw and one on the other side to tilt the camera up and down. Focus Adjustment 4 7 Rotational Axis Turn this to rotate the cameras output image so that it is correct on a monitor. Unlocking this screw allows you to re-adjust the focus of the camera after adjusting the zoom.
Other Products To Consider - AlienDVR 10 Reasons the DVR is great value for money alienHero 16ch 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Other Products To Consider - CCTV Mule Sends 4 video signals down 1 co-ax The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable. The Mules work in pairs. One Mule combines the video signals to transmit them down 1 single co-ax, the other Mule then reconstructs the individual video signals at the remote end.
Other Products To Consider - VoiceOff Programmable Audio Alarm Unit RS232 inpu triggers up t 9999 sound to s!! • Trigger Up To 9999 Sounds • 20 Alarm Inputs Trigger, 20 Recordable Warnings • Removable SD Card • Talkback Function • RS232 Connection • Weatherproof • Activate Remotely Over The Internet • Additional Sound Files Can Be Downloaded at www.voiceoff.
Other Products To Consider - Useful Tools CCTV Test Monitor BNC Ratchet Crimp • Easy PTZ Testing • Up to 6 Hours Battery Life • Monitor Output Testing • Check Video Signal Strength • Cable Continuity Checker • DC/AC Voltage Tester • Wrist/Neck Strap • Built-in Speaker Includes Crimps - 2pc 3pc Mini 3pc 248 Order Code: Order Code: LCD350 For more information visit www.cctvmate.com TOO980 Learn how to crimp a BNC! See online tip 248 More online tips at www.systemq.
Specification Controls Freeze Frame Display Modes Power Input Current consumption PSU IR Remote Control Video In Video Inputs Video Out Video Outputs Dimensions Push Button Yes 8 12V DC - 2.1mm Plug 270mA Min 500mA PSU Required Supplied BNC 5 (4x Video, 1x DVR/VCR) BNC 2 (1x Monitor, 1x DVR/VCR) 149 x 124 x 28mm All specifications are approximate. System Q Ltd reserves the right to change any product specifications or features without notice.
