User`s guide

8 VIDEOMAN
.VIDEOMAN Digital.
5-1. Disk Tool (Experienced User Only)
ㆍ Total volume – Total created volume numbers(volume).
ㆍ Current volume – Current volume number where data is being saved.
ㆍ Total – Total Disk space(MB).
ㆍ Used Disk - Total physical space already used (MB).
ㆍ Usable Disk - physical space still available in the logical drive (MB).
ㆍ Max Volume – Number of volumes available in the selected drive (volume).
ㆍ Used Volume - Number of volumes dedicated to DVR recordings (volume).
ㆍ Add Volume - Temporarily adds more dedicated space to DVR recordings – will not be
finalized until “Create Volume” is clicked (volume).
ㆍ Delete Volume – Delete all the database volume in selected driver.
ㆍ Clear Volume – Deletes all stored data in all drivers dedicated to DVR recordings.
ㆍ Create Volume – Creates the number of volumes specified in “Add Volume.”
Note: In order to properly add more volumes to the DVR-BLACK16 system, be sure to check that
the number of volumes to be added has been stored in the right hand column of the bottom table
under “Add Volume.” If so, finalize the added volume by clicking “Create Volume.”
What is a Volume? Volume is the unit used by the DVR-BLACK16 DB system.
1 volume ~ 65MB of physical HD space. All image data is recorded in volume units. Once Used
Volume is completely filled, the program will continue recording by overwriting volumes that may
contain previously recorded data. It is recommended that important data be backed up prior to
the start of the overwriting process.