User`s guide

26 VIDEOMAN
.VIDEOMAN Digital.
: It shows the status of
display/record of cameras. The solid lights on the middle tab row indicate that images are coming
from the camera by the number written on the top row. The blinking lights, if any, on the middle tab
row indicate that the camera are to be enabled in the DVR Settings, but image is not coming for any
of reason. The solid lights on the bottom tab row tell that the image from the camera is being
recorded.
: This displays the status of the 4 digital outputs. A pressed tab indicates that
particular relay is active; a depressed tab indicates that the relay is inactive.
: When network connection is made this image lids up. Move cursor over the image
and IP address of net client will be displayed.
: Indicates backup execution.
: The numbers and bars on the bottom indicate the
total number of volumes and the number of volumes being used.
: Display current software version.
- Change of the first two digits indicates major change in software, next two digits indicates minor
changes and, the last two digits show types of board.
: Shortcuts for Search, Setting, Smart Search program .
: Exit the main program.
: lick “Open” tap makes the cover for P/T/Z and image control, opened.
: Pressing this will pop up the login dialog – requires a valid username and password.
: Click "CAMERA" to use the CAMERA CONTROL options. Click "IMAGE"
to use the IMAGE CONTROL options for tuning the image color.