User`s guide

20 VIDEOMAN
.VIDEOMAN Digital.
ㆍ Motion setting
To receive desired optimal detection, configure the following options.
- Sensitivity adjustment : Adjusts the level of color difference detection between the
foreground and background..
- Rate of motion : Adjusts the rate of motion detected by the camera – if the number is
higher, the camera will be able to better pick up slower moving objects.
ㆍ Color Control
- Brightness : Brightness
- Contrast : Contrast
- Saturation : Saturation
- Hue : Hue
- Default Value : Set to default value.
5-5. Sensor
ㆍ Selected sensor to use : Enable or disable a selected sensor.
ㆍ Sensor location : The place where the sensor is currently located.
ㆍ Sensor type : Select the type of sensor being used.
ㆍ Connected camera : Assigns a camera that will record if the selected sensor is triggered.
ㆍ Check time : Amount of recovery time allocated to a sensor if triggered.
ㆍ Emergency notify : If “Remote notification of events” was selected in “System” setup, an email
notification will be sent to the designated addresses if the selected sensor is triggered.
ㆍ Properties Sensor : Choose event for sensor detection (Refer to 5-7. Event Setup)